Recent content by micko

to Brett. so it is the same Way with the 2.0 petrol exept when you are bleeding. insted of the bleeding screw u unscrew the cap on the radiator and close it when its start to overflod. is that the way.

You Will have to remove the radio unit. And when you do that on youre model the little display on you radio will go to. I dont know If the temp and clock will be added to the nav screen, but I dont think it will

For the number plate you will need 2 bulbs. T10 just like in the doors. If they don't work just turn them around and stick them in again.

I will try to make a drawing of it. Or if I can I will some pics of it.

My broke to. I fixed it with some hard metal clips from the front brakes that I had leftover. I bended the clip into a small hook then I wiggle it in trough the spring like the oem one. But now it's much stronger. And after a month the spring has settled very nice and the boot opens perfectly.

Try eBay

The foam stops it so it doesn't bounce on the hard rubber stop.

judt want to say that the small thin hooks that is comming out of the ends on the springs is very poor. mine snapped so i had to make some new hooks for the ends. i found a spring for the front brake pads and used that. i cut it out to the length i needed and bended it with a hammer in a vice...

just fitted the springs. i put some foam in there to, so it dont bounce to much. the video in the link below http://vid394.photobucket.com/albums/pp21/micko1313/Mobile%20Uploads/20150615_220607_zpsavzhlax5.mp4

a bit more smooth. the car have only passed 80000km and the fluid look okay when it came out.

The fluid went perfectly through the dipstick tube. The funel fitted like it's was made for it. As i wrote in the guide. It is more simple to change the atf then the engine oil.

So boys. I have made a diy for the automatic transmission fluid change.

Just ordered som springs. I will try to make some foam by the boot lever so it will stop more smoothly. But very nice mod, looking forward for doing this my self.

in all you will need double din fascia steering wheel stalk control adaptor http://www.ebay.co.uk/itm/HONDA-Fit-Jazz-Insight-Steering-Wheel-Stalk-Control-Adaptor-Lead-CTSHO003-/250938675799?pt=LH_DefaultDomain_3&hash=item3a6d1c5257 patch lead for specific brand of headunit antenna adaptor (...

you will need a " Steering Wheel Stalk Control Adaptor " with a pacth lead for youre new head unit pioneer, sony, kenwood or wichever you have. the problem is that there isent any avaible for the accord 8th gen. but the one i got is for the insight or jazz as they are the same. i think it was...