How to get K-pro for Euro R CL7

Hi all,

I'm sure this topic has been discussed more than once here,

..but time goes on and I just want to know if there's anyone here that has had K-pro fitted to their Euro R. After lots of researched I realised that you can't just put K-pro onto your stock ECU like you can with a DC5 or EP3.

On the web there's links to the states and even Singapore where you can buy an ecu with k-pro and a harness.

Has anyone bought a kit like this before and is it literally just a swop with the old ECU?

CPL can supply me a k-pro into a used ecu with harness, but for like £1300.
I know cars on here gets reflashed sometimes, but I want to leave it open for re-tuning in the future.

Looking forward to some response.
Nico

Forget a k pro mate. Overpriced junk which only tunes outside core mapping table areas.

Get in touch with member ukcl9 for a proper ecu remap solution for a fraction of the cost. He can also remove the speed limiter if it's still set in the ecu.

as above k pro is expensive,i have got it in my euro r.it is far from plug and play.

we can reflash for bolt on mods like intake,header,exhaust.then if you wish for more power we reflash for skunk2 stage 1 cams.should see around 240+ bhp.

if you still want more,then i would look at changing the final drive to 5.1 or 5.3.as that will improve accelration loads

also removes jdm speed limiter.

pm me for a price

all ecu's are next next day delivery so for example send ecu monday,you get it back wednesday by 1pm

ukcl9 said:

as above k pro is expensive,i have got it in my euro r.it is far from plug and play.

we can reflash for bolt on mods like intake,header,exhaust.then if you wish for more power we reflash for skunk2 stage 1 cams.should see around 240+ bhp.

if you still want more,then i would look at changing the final drive to 5.1 or 5.3.as that will improve accelration loads

also removes jdm speed limiter.

pm me for a price

all ecu's are next next day delivery so for example send ecu monday,you get it back wednesday by 1pm

Click to expand...

Hi there!

We have been in contact before and I can see that many customers are very happy with what they get.
I have just recently added a CT icebox to my car (sounds really nice, (not too load) ..and I have a weapon R exhaust header on order.

There's 2 things that's raising my concerns, and my apologies for them.
1) I know you mentioned that you can map for the ad ons on my car, but I'm shipping my car end of the month permanently to South Africa, so what do I do if I need a remap, lets say if I ad a free flow exhaust or highlift cams.

2) The other thing I would like to know, what's this reflash called? (Its not Hondata?) Is there a spec sheet for it and is there a warrantee of some sort.

With these questions I just want to make sure of what I get as I am putting my cars life in the post when I send my ECU to you.

Best Regards
Nico

Hi there UKCL9,

For some reason I can't send you any messages. It say you can't receive an messages?

1 you can add bolt on mods when you like,the ecu can handle these.but you will need to have your ecu reflashed again if you fit cams, i dont think sergey has a dealer near africa.

2.its just called a littlebo reflash,you can google it and you will find he has reflashed 100's of accords.there is no warrenty given,but if a problem arises we will do our best to fix it,i think you will find no engine tuner will give a warrenty for a remap

i will pm,try replying to it

thanks

Hi I'm new to this I have a 03 accord euro r and have a few boltons that i wanna do but i need a tune for it and was planning to get a kpro but it is costly plus the additional harness that's needed, I'm getting ready to put in skunk2 stage 3 cams with valve springs is it possible to do a flash and get a tune for those type of mods. no bottom end work and just exhaust pans and cold air intake.

Hi
The euro r reflash can't support for skunk stage 3 cams
You are better off get a final drive instead.as the cams will only move your power higher up the revs,not street friendly

For total custom tune just use Flashpro for TSX and TSX ECU 07-08, all is plug and play