What's new

Rear anti roll bar corroded where the bushes fit

Chas

Members
Messages
12
Reaction score
0
Location
Buckie, Scotland
Car
Honda Accord Tourer
Hi,

I've been getting a clonking noise from my 2008 Accord tourer 2.2i ctdi. I've replaced the rear drop links and went to replace the 22.2 mm bushes on the anti roll bar but I noticed it's quite corroded/pitted where the bushes fit.
My question is do I just fit the new bushes and hope for the best or do I need to replace the anti roll bar?
All ideas welcomed and thanks in anticipation.
 
usually just sand back to remove pitting, sharp points, pack the bush with suitable grease and install. Unless it's really bad that it affects diameter.
 
Silicone grease, you don't need a lot just a light smear and clean off any that squeezes out.
 
Top