Have searched and read many a topic regarding the VSA system and problems - But unable to find any similar to my issue.
Brief history
Bought the Accord 2 years ago with the VSA light on - Was due to a knackered rear sensor. Replaced sensor with a non OE part.
Fault cleared - and ran fine for a few weeks / months.
Ever since then, when starting the car - Randomly the VSA light would come on for a second, then turn off as normal (Would kick the VSA fault message on the LCD on the clocks also but would go off instantly)
Always kicks out the code 84-1 (Sensor logic) - This is cleared every time and corrected every using a Snap-On scanner - Unsure of exact model but can find out at work tomorrow. No other code is ever displayed / stored. The scanner re-teaches the neutral positions as per the error code
This has now been going on for around one and a half years :blink:
Does anyone have any idea's as to why my car can't seem to remember the neutral positions ?
Brief history
Bought the Accord 2 years ago with the VSA light on - Was due to a knackered rear sensor. Replaced sensor with a non OE part.
Fault cleared - and ran fine for a few weeks / months.
Ever since then, when starting the car - Randomly the VSA light would come on for a second, then turn off as normal (Would kick the VSA fault message on the LCD on the clocks also but would go off instantly)
Always kicks out the code 84-1 (Sensor logic) - This is cleared every time and corrected every using a Snap-On scanner - Unsure of exact model but can find out at work tomorrow. No other code is ever displayed / stored. The scanner re-teaches the neutral positions as per the error code
This has now been going on for around one and a half years :blink:
Does anyone have any idea's as to why my car can't seem to remember the neutral positions ?