Change and bleed brake fluid by yourself

Hello

How i can change and bleed the brake fluid at the accord 2.2 i-dtec? Can i change and bleed the fluid with the old school art or do you have Special tools?

Because i dont have an compresor at home :-/

For any tips am greatful

Thanks and cheers from europe

You don't need any special tools. I made my own pressure bleeder and used it successfully on both my 7th and 8th Gens.

http://jmp.sh/A8eecUK

With a willing ***istant to pump the pedal at your command you could do it with nothing more than a spanner.

Thank you matt, again a perfect how to do list

But its bad that i cant buy an set or tool including a bleeder ect ect with the honda caps for the brake and clutch

If i bleed and change the brake fluid manuel, is there something to consider? Which side or wheel first?

And can i put the brake pedal while im changing the fluid to the floor? ( at the pumping ) hope you understand what i mean.

Because in the internet stays its not good to pump the brake pedal to the floor ( dont know why )

Thanks

I've never come across any advice that says don't push the pedal all the way down, but there might be a good reason not to? Hopefully someone else can help on that one...

The correct bleed sequence is as follows:

Left hand drive: Front left, front right, rear right, rear left

Right hand drive: Front right, front left, rear left, rear right

Thanks matt

In the internet i have found, that the pushing the pedal to the floor, while bleeding the system, is not good for the brake master poetry

The poetry can be damaged

Matt what do you mean, is this an solution for changing and bleeding the system?

https://www.amazon.de/gp/product/B01BSOV0Y6/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&tag=dcmotors-21&camp=1638&creative=6742&linkCode=as2&creativeASIN=B01BSOV0Y6&linkId=789aafcd5e0bae6a392253162a6bf225