Grayedout
Members
After about 18 months I finally got around to fitting a replacement compressor, albeit a second hand one.
Hooked it up and although I know it's not yet gassed I wanted to check that the clutch was working but couldn't get it to take.
Disconnected the feed and couldn't detect any voltage on it with the AC on Auto or Manual. Am I right in thinking there should be 12V here when the AC is on?
Checked all the fuses I could and all okay but can't check the relays.
I wondered whether it would disable the clutch actuation if there was no pressure?
I seem to remember somewhere on here there is a guide to bypass all the relays and just supply the clutch to check it.
Will do a search.
Hooked it up and although I know it's not yet gassed I wanted to check that the clutch was working but couldn't get it to take.
Disconnected the feed and couldn't detect any voltage on it with the AC on Auto or Manual. Am I right in thinking there should be 12V here when the AC is on?
Checked all the fuses I could and all okay but can't check the relays.
I wondered whether it would disable the clutch actuation if there was no pressure?
I seem to remember somewhere on here there is a guide to bypass all the relays and just supply the clutch to check it.
Will do a search.