Millage Correction

Hello guys, i am looking for a millage correction tool, which is cheap, any advice is welcomed.

I have found this one, is it any good and does it work on 2007 Honda Accord i-ctdi Tacho Pro 2008 July PLUS Universal Dash Programmer

here is a link to the site http://www.cardiag.co.uk/tacho-pro-2008-july-plus-universal-dash-programmer.html

Also i was looking for a ECU flasher to upload my custom maps, i have 2 maps done, 1 for performance and other is for Economy (done by protune in blackpool)

Thanks

Mileage correction on the Accord will need the clocks out and isn't for the faint hearted. For map flashing, you could just use a Galletto 1260 (£20 off eBay).

By the way Jonny from Pro Tune is one of our guys (an Elite Agent)

Welcome to TA by the way.

F6HAD said:

Mileage correction on the Accord will need the clocks out and isn't for the faint hearted. For map flashing, you could just use a Galletto 1260 (£20 off eBay).

By the way Jonny from Pro Tune is one of our guys (an Elite Agent)

Welcome to TA by the way.

Click to expand...

Could this cheap flasher do damage to my cars ECU, also how can i view the map files is software included?

and for the Millage correction, will the Tacho Pro 2008 do my car? i understand it may require opening the dash,

Thanks

Not sure mate, mileage correction is not our area of business.

The Galletto will come with software.. it can be risky in the wrong hands but as long as you are just reading and writing your files and not modifying the files themselves, it's fine to use.

F6HAD said:

Mileage correction on the Accord will need the clocks out and isn't for the faint hearted. For map flashing, you could just use a Galletto 1260 (£20 off eBay).

By the way Jonny from Pro Tune is one of our guys (an Elite Agent)

Welcome to TA by the way.

Click to expand...

Hi Fahad, I got the Galletto 1260, I tried to load the files jonny did for me, it wont flash

FILE: HONDA ACCORD 2.2 CTDI 140HP G9GUL SW_1037386768.dat
Bytes: 1000D0
Checksum: C4C9
Marca: GM DELCO
Num. HW: 19áÿ$Õ[ûMÙ·÷y‡
Num. SW: D9+ÏN]Þæz?¼*X

Tuned
FILE: HONDA ACCORD 2.2 CTDI 140HP G9GUL SW_1037386768 ECOPOWER
Bytes: 1000D0
Checksum: F4EE
Marca: GM DELCO
Num. HW: 19áÿ$Õ[ûMÙ·÷y‡
Num. SW: D9+ÏN]Þæz?¼*X

Whats on the car now, read using Galletto 1260
FILE: honda
Bytes: FFFFF
Checksum: 950F
Marca: Bosch
Num. HW: 1037386768
Num. SW: 1037386768

Is it possible to convert the KESS files to work with Galletto?

Thanks man

That's because Jonny is using a Slave KESS which is coded to the MASTER held by Elite Remaps. Drop me an email with your files, I'll sort them out.

F6HAD said:

That's because Jonny is using a Slave KESS which is coded to the MASTER held by Elite Remaps. Drop me an email with your files, I'll sort them out.

Click to expand...

Thanks man, I have sent you email with map files to info@premiertuning.com

Kind Regards

I am reading about this Galletto 1260...

I have a 2003 CL9 which I am breaking now and has been reflashed years ago. I bought another CL9 from the same year and will transfer some parts. I would love to transfer the map too (or the ECU).

Does any know if this Galletto 1260 could do it?