Kaput!'s latest activity

  • Kaput!
    My 2.0 petrol runs as sweet as ever but one annoying problem its always had on hard/hot/long runs is intake heatsoak leading to a...
  • Kaput!
    Kaput! replied to the thread Wheel spacers info needed.
    I am in exactly same position as you.I have just spent £180 on four new hubcentric japspeed spacers for my mk7 tourer having never used...
  • Kaput!
    Kaput! reacted to bobfish45's post in the thread Rust with Like Like.
    On ebay there is a company in Lithuania, it's complete 1/4 panels and was just over £100 for both sides, so I've loads of spare metal to...
  • Kaput!
    Kaput! reacted to antdad's post in the thread Ball joint press with Like Like.
    An aftermarket ABS sensor can be had for less than a twenty quid nowadays however besides dealing with the aftermath of the breakage in...
  • Kaput!
    Kaput! replied to the thread Ball joint press.
    Defo correct way to tackle this i agree! Thanks for the tips guys.
  • Kaput!
    Kaput! reacted to mlkehunt's post in the thread Ball joint press with Like Like.
    I left mine in. follow the wire up the knuckle and upper wishbone and you'll see a passthrough, two flatheads to pop it off and then...
  • Kaput!
    Kaput! reacted to bobfish45's post in the thread Rust with Like Like.
    I've done it recently, it is easy, at the bottom of the liner, front and rear are screws, then around the liner are plastic plugs. Ease...
  • Kaput!
    Kaput! reacted to antdad's post in the thread Rust with Like Like.
    Yes there's a bit of mixture but even if you break a few because they were damaged on removal, rusted in or whatever you can buy...
  • Kaput!
    Kaput! replied to the thread Ball joint press.
    Sound advice thankyou! I am a little concerned though about abs ring and sensor.The videos ive seen show the plastic sensor itself...
  • Kaput!
    Kaput! replied to the thread Ball joint press.
    Would you recommend any particular ball joints? Ive read delphi ones are decent? Dont plan on doing this job twice lol
  • Kaput!
    Kaput! replied to the thread Ball joint press.
    No air tools unfortunately but i have pretty much everything else and a little workshop.Im thinking i will pick up one of these press...
  • Kaput!
    Kaput! replied to the thread Tailgate again!.
    Thats why we are here and more often than not most problems get sorted without the need for expensive diagnosis and garage repairs!
  • Kaput!
    Kaput! posted the thread Ball joint press in 7th Gen Accord.
    Im looking to replace both lower ball joints but im unsure whether the universal C clamp press kits that are widely available on ebay...
  • Kaput!
    Kaput! replied to the thread Tailgate again!.
    From experience i can tell you removing battery for a while can reset and allow tailgate function but it will fail again until fault...
  • Kaput!
    Kaput! replied to the thread Accord k20a6 grinding starter?.
    No worries glad you sorted it.
Top