Search results

  1. A

    Rear brakes servicing

    I did everything
  2. A

    Rear brakes servicing

    Can you help me ple, i also replaced the rear rotors and pads, but not after 350 miles the outer side of both pads is half touching the rotors, inner side is fully touching , some people say it will be fine after few hundred km ?
  3. A

    Front left brake is binding, what could be reason

    Its a brand new rebuild kit, old were rusted
  4. A

    Accord 7th Gen brakes update: All OEM solutions

    ATR caliper rebuild
  5. A

    Accord 7th Gen brakes update: All OEM solutions

    I Just rebuilt my ATR calipers, its an easy job, just need a little trick to fit the dust boot. trick is to tie the rubber boot on other side of piston with several threads by rolling . Pull the boot and gently push towards the grove on calipers. and the pins are différent for top and...
  6. A

    Are diesel struts / shock absorbers different from petrol ?

    Funny thing is that Honda gave different part numbers for diesel and petrol models, but while buying aftermarket KYB ( it is also OEM, but no Honda stamp ) same shocks absorbers had both references of diesel and petrol versions.
  7. A

    Are diesel struts / shock absorbers different from petrol ?

    i did not find the answer, but i put all four new KYB in. Car handles better now , rear ones have more thickness.
  8. A

    Front left brake is binding, what could be reason

    Is there any difference in upper and lower guide pins ? May they are intermixed by me in last service ( driven just 15 miles after service )
  9. A

    Front left brake is binding, what could be reason

    I also inspected both calipers without pads, on pressing of paddle only small piston comes out, when i block the movement of small piston, then the big piston moves.
  10. A

    Front left brake is binding, what could be reason

    New fluid, don’t know if its pitted cylinder or faulty brake hose, What is square cut seal ?
  11. A

    Front left brake is binding, what could be reason

    Front left brake is binding, i recently lubricated all pins and pads sides. The left wheel start to bind , not too bad , the car moves, all grease came out in liquid form from pins due to heat Is there any difference in top guide pin and bottom guide pin ? What could be cause ?
  12. A

    REVIEW - Clutch Install, Accord i-CTDI

    What all you need to change for six speed box ( other than the box ) cables? Lever ? Etc
  13. A

    Which aftermarket shock absorbers are best ?

    Better than kyb?
  14. A

    Accord 7th Gen brakes update: All OEM solutions

    pads are PBS prorace, some says its only track pads some says its for both road and track, my sole purpose is to use car on road
  15. A

    Accord 7th Gen brakes update: All OEM solutions

    Got my self ATR brake setup with almost new discs and pads. which discs should i use ? These slotted ones with 28mm thickness or stock 300mm with 25mm thickness ? i dont want noisy brakes
Top