Recent content by szorstkousty

And I made small hole in rocker cover too, but glued it. :-)

Bear in mind that you may damage copper seals or bed if you run with loosen injectors. I soaked it with everything, but best was hammering. I made a leaver out of two narrow cut crowbars and one was trying to turn it slightly one way then the other, while my mate was hammering it from the top...

Yes. 2004. I didn't changed top and double sprockets because I spoke before with few guys who did it before and these two were in good condition. My looked like new. No sign of use. But pump sprocket was worn out badly. And chains longer than new. Main chain was about 7mm longer when lay them...

I've checked it as you suggested and it works. Only driver side is 4*c wormer than other. Checked with thermometer. Apart from this seems working OK.

I bought all guides ,both arms, both tensioners and small sprocket for pump. All this was £530 from honda. Chains I bought online don't remember. Febi, it was £80 for both chains.

Thank you. Will try it tomorrow, and come back with more details.

I have refilled gas last summer. And changed cabin filter too. Do you know how to get to flaps? I reckon it may be this, because passenger side goes freezing. It probably got stuck.

My whole set cost about £600. New tensioners just replace with new ones, same bolts.

I could not find any information about my problem. My air conditioning works but cold air blows only on a passenger side. Driver side blows air in temperature outside. Anyone knows what could cause it?

My diesel does 500 till light comes up.

Hi Ross. I went to Poland and back with no problems. Till now have done over 3000 miles and no difference. Still whining. I'd like to ask you something as you probably know more about cars than me. On the way to and back to Poland I've noticed black smoke coming from exhaust. Car was loaded...

Ross are you going to change this bearing or the whole pump? I have no idea how to get to it. Please let me know what is the outcome. If you got rid of this noise.

Just got the video done with noise on mine 2.2. https://www.youtube.com/watch?v=gWmWhjocDOc&feature=youtube_gdata_player Can't wait for your results because my sunds exactly the same. Noise on my was immediately when first started after change ,it small chance that this is vacuum pump. New...

Taking sump off is a pain. You'll need to jack up an engine about 60mm to remove it. But it goes in easier(in my case:-) ). Undo a ac compressor was a challenge. Not a good access and long bolts.

Yeah you right. You can not check pressure sensor on diesel, it is more complicated. I had exactly the same symptoms and it was sensor. £55 with vat and it took me 3 minutes to change it. Do not have to take bumper off. Do it through lower grill with spanner(i think it was 27). I only removed...