According to 1010tire wheel offset calculator after putting my current specs in as stated on other posts, and your sizes including the 25mm spacers which would make your offset 30mm it would seem that your front would be 6mm shy of flush and rear 10mm shy. But bear in mind this measurement on the rear is from the inner edge of the arch lip. If you want true flush ness you will need to remove return lip on arch or roll it in which case you can fit a 10.5" rim on the rear of our cars with the correct offset. If you want a true picture of what the sizes above would look minus the 8&10mm have a look at my other thread. Hope this is some help.