freddofrog
won 16.4k on Euro lottery :)
yeswillcook1275gt said:does anyone else think the engine mount is shot ???
but I have no idea if that is the cause
yeswillcook1275gt said:does anyone else think the engine mount is shot ???
thanks mattGoodluckmonkey said:BTW - fresh driveshafts has all but cured it on my car.
Still has a tiny vibration at those speeds which is only noticeable if I look for it. Because I still need to change the intermediate driveshaft, as that has a little wear too.
Fitted Blueprint driveshafts, but I think I need to go to Honda and weigh them out more cash than I'd like for the intermediate shaft.
Goodluckmonkey said:BTW - fresh driveshafts has all but cured it on my car.
Still has a tiny vibration at those speeds which is only noticeable if I look for it. Because I still need to change the intermediate driveshaft, as that has a little wear too.
Fitted Blueprint driveshafts, but I think I need to go to Honda and weigh them out more cash than I'd like for the intermediate shaft.
cheers Matt i am hoping its ripped to shreds TBH ha haGoodluckmonkey said:It's quite accessible from under wing, and the top once the airbox is out the way.
Unless it's torn, it's probably not worth doing though.
if the bottom mount is ok its got to be the driveshafts as there will be nothing else left!!Goodluckmonkey said:I still reckon it's driveshafts. Mine rattled like hell.
so whats best way of testing for slack jacked up and turn the road wheel ?Goodluckmonkey said:Yep, sounds about right. It's the slack on the splines.
It makes it as if you're just pumping the throttle loads as the slack causes interruptions in the drive as they wobble.
Before you drain the gearbox oil, make sure you can remove the FILL plug first , or you're gonna struggle filling it back up ( look down the back of the battery and you will see it ,it has a 3/8 in square opening in its center ), you can use a 3/8 extension bar if you don't have any male gearbox plug sockets.I recommend the gearbox plug sockets.It can be removed with enough extensions without taking the battery off etc..willcook1275gt said:i have done the n/s and no oil ran out as i thought it would have do u think there's not enough oil in ??
and how can u check it?
cheers