Recent content by ANXIETY

Hi again. Eventually after chasing a certain company for most of the summer I eventually fitted a reconditioned pump. When I fitted it the lights were out but when I bled the brakes manually the lights came back on again. I took it to a garage which have a diagnostic reader to get my brakes...

Anyone?? Can someone tell me what diameter are the lines coming from the master cylinder to the module on a right hand drive accord? Thanks, I need to know to be able to sell it for someone as a favour.

Hi guys, I want to sell an ABS pump/module for a petrol 7th gen Accord 2.4 Type-s as it does not fit my car. It is exactly the same as mine only that the size of the fittings on the 2 pipes coming from the master cylinder are bigger than on mine. I would have posted in for sale if I did not...

http://www.horsepowerfreaks.com/partdetails/hondata/Engine/Intake_Manifold_Gaskets/-/5361 Are these really any good?

I still have not fitted the new one. I did not bother to tighten the old one as I was replacing the whole CMC. In my case I would think it would have solved the problem as it would stiffen the flexing of the bracket which made most of the noise but the CMC was shot anyway as it was affecting...

No, I had already bought a new master cylinder so I might aswell change it. I still havnt fitted the new one yet, I only took the old one off but as I'm still sorting out my problem with my ABS waiting for another unit I've left the honda to a side and sorting my 4x4 out which I've got to put...

I found that my clicking and groaning noise was because one of the nuts which holds the clutch pedal braket and master cylinder had worked itself so loose that the nut nearly fell off on its own :blink: For sure worth a look.

On my car it will probably look slightly diferent to yours as it is a left hand drive but it is the components should be the same. If you look under the drivers foot well look for the clutch pedal bracket. The bracket is held by three 12mm nuts. One is right at the top and the other two are...

http://www.audizine.com/forum/showthread.php/413842-ABS-Module-repair http://www.forocoches.com/foro/showthread.php?t=3460153&highlight=abs+brico Here is a couple of links

I cant remember, I think it was '54-01 Fail-safe Relay Failure' I've seen in a audi forum some guy who had a similar problem and opened his sealed unit to find the solder had melted on a relay and all he did was use some conductive silver epoxy to fix the problem. Has anyone here opened one of...

No problem mate, anything to help the guys here. I wish to contribute more though. Theres fantastic info and advice here and its good to give back :)

I think I'd be better off sending the pump I received back and not mess about with it and get my money back. As for my one I can either send it away to get it fixed or look for another one. I've seen this place...

I'd be very interested in you having a look once over my car but that would be a bit hard unless you came over to Gibraltar on holidays lol. I have a second hand pump from a scrappie would it still need to be calibrated?

I know this issue has been done and dusted in this site with great help which I have followed but just a heads up of an oddity which happened to me yesterday. My clutch pedal was forever clicking and groaning since I bought the car and because of this I found this helpful site. I followed the...

Ok, I'll revive this thread lol. I thought I could live without ABS and traction control but my MOT guy thinks otherwise so I bit the bullet and took the car to be scanned. The problem lies with the pump relay so a new pump and module is needed. I bought one from ebay which apparently was...