antdad's latest activity

  • A
    antdad replied to the thread Type s 2.2 Idtec tuning.
    Dunno, your type S already has an upgraded turbo, intercooler and brakes from the standard idtec so you're probably maxed out as to what...
  • A
    antdad replied to the thread Type s 2.2 Idtec tuning.
    How big, I think the S type can be tuned to around 230bhp with EGR blanking and DPF removal. Fahad will be along shortly...
  • A
    antdad reacted to Bounder's post in the thread Space saver with Like Like.
    I picked up a piece of metal in my tyre and it damaged the casing beyond repair even though it was in the centre of the tread, tyre was...
  • A
    antdad replied to the thread Space saver.
    As this thread demonstrates there seems to be a variety of space saver sizes available for the accord from 15" to 17" but does it...
  • A
    antdad reacted to Bounder's post in the thread Space saver with Like Like.
    Are you sure a 16" rim won't fit? I have a tourer and I fitted a 16" Steel wheel from a Civic. Its smaller than the 18" stock alloys...
  • A
    antdad reacted to Grayedout's post in the thread Another faulty tailgate with Like Like.
    I just make sure I've pushed it back every time I have used it, which is not very often as I use the remote most of the time.
  • A
    antdad replied to the thread Another faulty tailgate.
    Oh, I've given it a good squirting with WD40. Tbh it still feels sticky and that it wants to stick, what else should I try?
  • A
    antdad replied to the thread Another faulty tailgate.
    Thought I'd have another look in a few spare minutes with my new found knowledge, unstuck the handle and hey presto all working. Many...
  • A
    I've been looking for fronts which are hanging on but as it isn't a MOT fail I haven't been overly concerned. If you want new you have...
  • A
    antdad reacted to Grayedout's post in the thread Another faulty tailgate with Like Like.
    Check the handle. Mine would not latch properly and I found the handle was a little sticky and wasn't returning to the correct place...
  • A
    Having read around the issue I'm pretty sure the loom is partly broken hence the partial failure which powers open and shut but doesn't...
  • A
    JB Weld wouldn't tolerate the temperature, it would have to be an exhaust paste. I would try it but as you say access you need access...
  • A
    antdad replied to the thread Oil Pump Chain Renewal.
  • A
    antdad replied to the thread Oil Pump Chain Renewal.
    I really don't know sorry, from what I can tell the manual recommends removing the engine and gearbox for that job If that's not an...
  • A
    antdad replied to the thread Oil Pump Chain Renewal.
    Click on this.... https://mega.nz/file/8yBikA7J#rka_gnMLM9XaN_09dI8GiTaZVcyNwgx3D93uyuAgIm4 it's the workshop manual. You'll need to...
Top