Have purchased a random orbital polisher with a 135mm velcro pad so my quess is a 140mm pad would be ok. the question is where do I get the foam pads from sp I can get polishing. Just read a previous post on this subject and have tracked down the item any other suggestions would be welcome
Got a specialised frequence counter. Wil look for the harmonic that is causing the problem.If I fit the brake housing with a mesh screen of the correct size this will eliminate the problem. (bit like the door screen on a microwave) let battle commence :unsure:
an unusal phenominum! When the brakes are applied the high- level smd device fitted wipes out the radio signal. Will find a methoid of screening the interference and let you all know. Having held a ham radio licence for 30 years I will come up with a solution(some sort of mesh screen in the...
Use Phillips Blue vision>pleased with Light ouput BUT short life. First one went after 12 months. Obtained from atobulbs direct in Southampton. Good to deal with
Thanks Jav been looking at your diy job on the lights which has prompted me to go ahead and fit led's. For tali/ side light you fitted red smd's which one, do you have an e-bay No.
About to order LED fittings. Which colour bulbs, is it neccessary to put red bulbs behind red lenses. Will white give better light or be too 'pimk' same goes for turn signal amber or white. Any thouights on this dilemma
Can vouch for Alnugs advise GET THE RIGHT TOOLS its a dodle. Rewind tool is a must.Don't think the pistons rotate but you won't get them back without a wind back tool. Fitted EBC green stuff and has greatly inproved the braking
Hi everyone. Going to fit daylight running lights. Any suggestions on what type,(LED) :lol: where to fit, Wired to? etc any suggestions gladly recieved :)