mlkehunt's latest activity
-
mlkehunt replied to the thread headlights.yeah the 12v low beam circuit feeds the ballasts, you take the cable that plugs into the internal "harness" for the h1 bulb, plug it... -
mlkehunt replied to the thread Wheel speed sensor or abs magnetic ring?.inspect wiring near the brackets, 7th gen is probably worse for this where it mounts on the upper wishbone but it may be worth a shot if...
-
mlkehunt replied to the thread Clutch help 2.2 i-CTDi.https://www.sealey.co.uk/product/5637204655/self-adjusting-clutch-tool I have one of these, fits 100% but check with mechanics locally...
-
mlkehunt replied to the thread Head Gasket Selection.straight from the electronic service manual, I guess it gets a little confusing because they've split the tightening instructions into...
-
mlkehunt replied to the thread Head Gasket Selection.I have not had to do this particular job, but this kind of tightening torque is not unheard of, but you may need a longer breaker bar...
-
mlkehunt replied to the thread Android heat unit advice.I'm just a curious amateur like the rest of us lol petrol dimensions are sligthly different but the couplings are in the right places...
-
You are an absolute star. I think from watching everything so far (the dismantle and cleaning of the bell housing internals) I might...
-
mlkehunt replied to the thread Clutch help 2.2 i-CTDi.unless you have a really stubborn circlip or crusty splines, yeah they just pop out. swift and decisive prying/hammering works better...
-
mlkehunt replied to the thread Android heat unit advice.apparently, the operating conditions for the valve are quite specific, below 5c ambient and water temp below 75c, and it only does this...
-
mlkehunt replied to the thread Clutch help 2.2 i-CTDi.good luck :)
-
mlkehunt replied to the thread Android heat unit advice.https://www.aliexpress.com/item/1005008941656020.html these are a thing now, but no one in the integrated head unit megathread on...
-
mlkehunt replied to the thread Clutch help 2.2 i-CTDi.I can tell you that the ESM replacement procedure does not call for engine removal and fluid drain bar gear oil. I can print out the...
