Troy McClure's latest activity
-
TTroy McClure replied to the thread Changing a clutch master cylinder.Final update - all is back together and working fine. On hold for a while because I tore a muscle/cartilage in my ribs and couldn't face...
-
-
TTroy McClure replied to the thread Overboosting 2.2 Diesel I-Ctdi - Solutions?.I can't believe anyone would do a remap of any kind without deleting the DPF. Unplug one of the DPF sensor connectors and go for a...
-
TTroy McClure replied to the thread Overboosting 2.2 Diesel I-Ctdi - Solutions?.If the overboost is real, there's a grub screw to limit the turbo wastegate. On an i-DTEC it's under the heat shield which means...
-
TTroy McClure reacted to Channel Hopper's post in the thread Changing a clutch master cylinder with
Like.
When dealing with the Accord pedal here I found dropping the drivers seat and lowering the back rest, I could do all adjustments upside... -
TTroy McClure replied to the thread Changing a clutch master cylinder.Good to know, thanks. Not happy about that R clip not being in place so will have to do some dismantling to swap the push rod end...
-
TTroy McClure replied to the thread Changing a clutch master cylinder.Follow up - after lots of bleeding, the clutch pedal is still too close to the floor and that lock nut and adjustment is impossible to...
-
-
TTroy McClure replied to the thread Changing a clutch master cylinder.5. There's a C shaped steel tubular section that's going to get in the way of everything. It's held by four bolts, two each side and...
-
-
TI started by replying to an old thread where people had given up changing their clutch master cylinder, but thought I might start a new...
-
-
TTroy McClure replied to the thread Washers and wiper issues.Those are seperate non-return valves. The accord washer jets have an internal polythene flap to prevent the screenwash running back...
-
TTroy McClure replied to the thread 2010 ACCORD DIESEL TYPE S DPF ISSUES.Get shot. They don't need it.
-
TTroy McClure replied to the thread Rear heat shield.Same happened to the heat shield on my 2009 Tourer. Advice from MOT guy was rip it off and chuck it - the back box doesn't get that warm...
-
TTroy McClure replied to the thread Premier Tuning CU3 EGR Delete + Stage 1 Review.The legal limit for my 2009 Accord was 1.5. After EGR and DPF removal I asked to see the smoke test results at the next MOT and it had...
