Search results

Did you apply the oil to the nut

https://www.hondaaccordforum.com/forum/attachments/general-tech-help-7/4471d1296752900-2006-accord-ex-rear-wheel-bearings-replacement-disc-brake.jpg

I have no experience on your vehicle but I recently had to remove an injector from my sprinter 311 cdi, as it was leaking past the copper seal. I used oven cleaner to clean the injector housing and retaining bolt hole, and bought some brush drill bits to use inside them. Also taped a small tube...

Can you not just solder an extra piece in? Starter motor? Does that mean you ordered the wrong part?

Brakes binding can cause the disc to warp if it overheats. At 46k the discs may have developed a lip around the outer edge that the new pads could be catching on. If they rule out any problems with the discs, ask if they could remove the calliper and see if the disc spins freely. Also it looks...

Absolutely agree, got to be handbrake or incorrectly fitted parts. I'm gathering that with new callipers they also included the guide pins. Discs could be badly warped. I'm guessing you rely on this garage, and I realize it has cost you a lot of money already, but maybe consider taking it...

Never heard of this happening before, I can only ***ume they've fitted the wrong callipers or pads. When mine was binding I fitted a new piston and seals to the calliper and serviced the guide pins and all was well.

Did they check over the handbrake operation?

I'd say no, never come across any being side specific on any of the cars I've owned yet.

I'm struggling to find a 2008 es gt tourer on the parts site, sure it's not 2009? There are 2 pipes, but I wouldn't bother replacing either, I had a split egr pipe, it was over £200 for either one from honda, then all the hassle of getting the job done or doing it yourself. I decided to get the...

I'd change the whole arm, found one here but there maybe cheaper ones: https://www.ebay.co.uk/itm/153180317541?hash=item23aa422765:g:vT8AAOSweqxbm5N-

Have you searched for any info about doing this? I've done something similar on my daughters a3 audi. Don't know if this is similar to yours:

Contact F6HAD here: info@premiertuning.com He can advise you about injector coding ( if not done by your mechanic) and possible dpf removal

How is that supposed to be happening?

Have you checked ebay for second hand ones?

Had similar symptoms on a nissan note 1.5 dci. Started having starting issues, sometimes engine would turn over and start and other times it wouldn't. Changed the car battery for a new one, no difference. Changed the key battery and it seemed to help for a while but eventually the car wouldn't...

A few older threads on this forum about this if you search google for "mk7 accord headlight bulbs keep blowing". Unfortunately a few possible causes too.

What bulbs are you using?

100w may be too much but I'm not sure. Have a look on here for them, not too pricey either: https://www.parts-honda.uk/