Search results

there is one more style of 16" wheels, these ones which you've posted can be bought for about 150-200, standard offset for accord is 55, but you can fit something with offset about 40 it depends how wide the rim is, I have 35 with 9" wide rim at the back and 8" on the front ;)

no, it's not for 8 gen not even for 7 gen.

no, it won't fit, first of all according to the size you posted it's 15" so I believe it's from civic, secondly 8 gen has lower offset then 7 gen so you may end up with the rim touching caliper, and lastly I reckon you have 17" and this space saver is 15" so if you'd put it on the front, VSA...

I would go with refurbished injectors from Bosch centre as I believe they'll give you some warranty so if something go wrong you can bring them back, with used injectors you never know what you'll get and it may appear that they're in worst condition then yours

I don't know what kind of wheels you're trying to fit as oem wheels have high offset 55 which imo looks awful with wheel is hidden in the wheel arch, so if you stick with the wheels with offset 55 or less you'll be fine with calipers, tbh I've got bigger calipers from Type S 8 gen which are twin...

standard intercoolers are a lot too small for our cars on the stock map, so on remaped car is much worse, because after remap car is getting more fuel, but still not getting enough air, as you mentioned when car is cold there's less smoke, as soon as car getting warmer, all engine parts...

no, there are different bumpers and bonnets, so they're not transferable.

no worries Gaz ;)

upss I thought that all paddle plates are the same regardless if it's with dmf or smf.

for £420 you'll have SMF from CG, so even if it's £80 more then for DMF you'll save yourself hassle with extra work after your new DMF will last another couple months, do it once and properly ;)

no problem ;-)

there are 2 silver screws behind light lenses and 2 black screws near HFT microphones

did you connected all fuel lines correctly? did you bleed fuel system after filter replacement?

rages are 7.5" but you're getting 8.5" because you're measuring whole width of the wheel where it should be measured without wheel flange, hope this helps

have you tried this: -get in to the car and close all doors, don't lock them. 1-turn the key in the ignition to position II 2-press and release lock button on the key 3-turn the key back to position 0 4-repeat steps 1-3, 3 more times (4 in total) 5-now central locking should be in the...

although I have 7 gen, but I have ET35 front and rear, but.I'm lowered so it looks different then on stock suspension, it also depends how wide are your rims, I have 9" at the back and 8" on the front, they are sticking just a bit on the front, but rears are ok ;-)

you can spent a lot of money for fast car like porsche or r8 or similar but the face of the guy in porsche who stayed behind of supercharged vw golf mk1 would be priceless :lol: so I'd invest my money on serious mods instead of buying an ordinary porsche.

alternator bearings or pulley bearings, did you changed your aux belt to shorter or still running long one?

not CL9, but worth to mention ;-) https://www.youtube.com/watch?v=XfYk88xmWQY

there are 2 cars on the polish forum, here is dyno chart one of them 311 BHP and 402 Nm and here's second one http://www.youtube.com/watch?feature=player_embedded&v=SH2VFNMABfI http://www.youtube.com/watch?feature=player_embedded&v=ExQzXNVUQns