Search results

Not today but yesterday, put an alternator in it.

Thanks for the info, I did get sorted. Just booked around the engine bay and found exactly what you described. Ran the wiring across the back of the dash to the switch. Not as bad a job as I thought it would be, the biggest headache was getting the front bumper off

Hi All, Looking for some pointers in getting my fog lights wired up, the electrical side I have no issues with, I would just need some help with getting the wiring from the engine bay into the cabin/dash to get to the switch. Thanks in advance G

Tanna, the difference is like night and day. You won't get any more volume but the sounds are much sharper and clearer. It's really not a big job, I'd say I swapped out front and back in a total of about three hours. If you leave out the sound deadening it's quicker again You can use self...

6.5" Jbl co-axials in the front and co-axial 6x9s in the back. The back speakers are a very easy swap, old ones out and new ones drop straight in and screw into the original holes. I ran a strip of dynamat round the speaker holes to prevent any vibration. Same wiring connector is used in the...

I fitted a connects2 unit (p/n Connects2 CTVHOX001) about 30 quid on Amazon. It connects to the DC changer port on the factory head unit, I had mine fitted in about half and hour. There are some guides on here already but in short Remove trim round gear shift Remove ash try Pry out the...

OK, Part 2 Up and straight out to finish the car this morning, strip down on the passenger side is slightly different so more pctures There are two screws hidden behind he silver trim on the passenger door trim handle As with the driver side, also remove the screws behind the lock handle in...

I swapped out the 9x9s earlier this week, it was quite a handy job. I got a set of 3 ways which I think are a bit tall for the standard grills and are fouling a little. It will be an easy fix though, cut the centre out of the speaker grill and retrim with acoustic cloth The new speakers do...

Hi All, I know this has been covered before but I started into my speaker upgrade this evening so I thought I'd document it as I went. I couldn't source speaker adaptor pods anywhere in the UK so I picked these up on the US site. See details below...

I made a start on mine at the weekend with the same kit, drivers was much worse than the passenger's but the compound works a treat. I'll need to go back over the drivers side and hopefully one pass will sort out the other. It's a very small detail that makes a big difference