Recent content by dandreye

  1. dandreye

    Tie rod end ball joint grease

    Hi All, Which grease can be used in tie rod end ball joints (and likely also in suspension ball joints) of our Accord Gen 7? Any particular one(s) recommended by Honda or otherwise known as good? I suppose they're all lithium based NLGI2 ones, something like Castrol 1503AD High Temperature...
  2. dandreye

    CL7 drive belt

    Hi @ally, Thanks for your reply. Good to hear it's working well. Here's a direct link to your reply there. My experience with mine so far is: - the pointer that initially was right in the middle of that rectangle has moved to the edge of it, so the belt clearly gave a few mm - there's a slight...
  3. dandreye

    CL7 drive belt

    Hi All, By now I'm well aware of several threads on (electric power steering) CL7 models' drive belts being shorter (1690mm) than 1760mm listed all over the place but only fitting hydraulic power steering CL7 models. That finally (after 5yrs of ownership!) made me realise why there's one less...
  4. dandreye

    Aux Drive Belt length - Petrol 2.0

    @ally: Many thanks for the details above. I've just hit this issue myself with Dayco 7PK1759. Just wondering how your Gates 7PK1685 has done so far?
  5. dandreye

    Castrol Magnatec 5W-30 and 10W-40 no good at all for K20A6?

    @SayamaAccord: Thanks for your reply. I saw that Exol oil referred (positively) from a number of threads here, so it must also be good. Just trying to work out the answers re Castrol meanwhile. Update: Been reading about excessive camshaft wear issue on K20/K24 engines with oils above "-30"...
  6. dandreye

    Castrol Magnatec 5W-30 and 10W-40 no good at all for K20A6?

    Hi All, Based on F6HAD's advice above in this almost 5-year old thread I've used up almost all my Castrol Magnatec 5W-30 A5 by now, and have had no obvious issues except modest oil burn. Just back from Tesco where there's a deal on it these days - with the following question to be sure: is A5...
  7. dandreye

    CL7: Charging voltage

    Mine was also showing green :-) Meanwhile I think I know what caused flat battery in my case: mostly very short trips averaging just 1 mile over the last 2 years, so it hardly ever got a chance to fully charge as I never cared to take it home for a proper charge until now. Besides that, being a...
  8. dandreye

    CL7: Charging voltage

    Thanks for the hints: I'll have to check all of those. The ~30mA draw didn't look abnormal to me while the car was locked, so I didn't check for leaks any further so far. Right upon locking it the draw spikes to ~1-2A for 10-15s and then returns to 30mA and settles there, oscillating around...
  9. dandreye

    CL7: Charging voltage

    I thought Yuasa batteries never die :) No stock BT handsfree in mine. I've just also measured the current when the car is locked and unlocked and got ~30mA in both cases to my surprise. Wondering what else besides the stereo might be contributing to that 30mA draw while it's unlocked although...
  10. dandreye

    CL7: Charging voltage

    Thanks for the confirmation! Meanwhile I've just measured it at 1k and 2k rpm and got 14.36V in both cases.
  11. dandreye

    CL7: Charging voltage

    Hi All, Could anyone please share the right procedure to measure the charging voltage generated by the alternator of a 2005 Honda Accord Gen7 type CG7 (2L petrol manual) and what that voltage should measure? Mine measures just under 14.1V when idling, wondering if it's high enough - but perhaps...
  12. dandreye

    Immobilizer chip type in 2005 Honda Accord CL7 remote key

    Hi All, The parts catalogue tells me the key for my 2005 Honda Accord CL7 is part # 35111-SEA-305 (no separate part # for the immobilizer chip). There are keys on the market that look exactly like mine (e.g. this one) but some of them come with ID46 chip while the others with ID48 chip. Is...
  13. dandreye

    Will F20B6 spark plugs NGK ZFR6F-11 fit K20A6?

    Hi All, I have a set of 4 barely used leftover NGK ZFR6F-11 spark plugs for my previous Accord with F20B6. Are they safe for use in K20A6 too by chance? It's NGK ZFR6K-11 designed for K20A6, so the only difference is in the letter after "6", which refers to "Firing end construction" as can be...
  14. dandreye

    Cheap ways to feed music into standard stereo model 2J20 via AUX

    Hi All, I have this standard stereo model 2J20 (would be great to know its make) in my Accord 7. Looks like there are several popular solutions to feed music via its AUX. While weighing them all I've found the following one for Accord 8: https://www.ebay.co.uk/itm/263185448679 I suppose there...
  15. dandreye

    HDS scanner for £15

    Ah that one I saw mentioned here: http://typeaccord.co.uk/forum/topic/15376-get-your-own-hds-tool/ I may never need its full functionality though: was thinking of a tool just for the things like clearing that Service Required LED (the one alerting to the time of oil change etc. ***uming it's...
Top