Recent content by morpheous87

PWM controller for the blower fan is working. But I'm getting an F-Can error and a fault code leading to limp mode. Currently I'm working on a solution to cut the PWM controller from the HVAC car's unit and I hope the error will fanish. https://www.youtube.com/watch?v=2BcObu1s5AA

The heater is mounted and working with On/Off switch in the glove box :D :D And the wiring job under the hood - A shot video on the first start up (the heater is lots quiter on real than in the video) : https://www.youtube.com/watch?v=BFpYEJDXSoc

The Webasto heater is almost ready. It's installed and working, only a GSM communicator and a PWM driver need to be installed. The GSM is start the heater remotely and the PWM driver will control the blower motor. It's needed to run the motor on 20-30% power, so the consumption to be as low as...

The bmw steeting wheel is for e46 and will be used on e46. I just practice the technology to do the form change. So now I'm working on a civic steering wheel to do the same as the bmw one. The dimension are of the core itself.

Thanks! This is the album I've made - http://s377.photobucket.com/user/morpheous87/Accord%20Ctdi%20performance%20and%20visual%20mods/story I will keep it updated with all my mods on the Accord, both performance and visual. What's planned to be done next is new custom exaust manifold, hybrid...

Still impossible for me to find out how to upload the pictures in the forum?!

I'm trying to keep it as close as possible to the OEM look , with a bit of muscles :)

Well, it's not so easy. I've already trimmed lot of the bumper in order to free up some space for the cooler itself. The problem was that the hoses and the pipes were bumping in the fog lights. I've trimmed there too, and free some space, but it wasn't enough. So I bough some more angle hoses...

Still lots of work left to be done. Piping is just behind the fog lights, pushing a bit the bumper and almost impossible to put it back. So this weekend I will redo the piping and put them below the fog lights. The intercooler is 550x180x66 with 63mm outlets. Those are reduced to 51mm, so from...

The broken links -

- some exterior carbon skinning - side mirrors, roof, some parts in the engine compartment too. - I've already respayed some wheels, not sure if they will be at the end. For sure I'm missing something, but I will update the thread and keep it up to date.

Visual modiffications: - from my previous post some of you know that I've changes the steering wheel witj Civic 8 one. I'm gonna modify it and ending up with something like this: Currently I'm working on bmw e46 steering wheel and it's almost ready, only leather stiching left, this is...

Hey, after my thead about transplanting facelift sat nav to pre-facelift, I decided to open a new thread, where I will post all my new stuff regarding my Accord. Last weekend I removed the OEM intercooler and put an aftermarket one. My idea was to free up some space, so I will be able to...

Hi, I'm going to change the intercooler with 550x180x65mm with 63mm outlets. I will change the turbo and the exhaust manifold soon after, but now I want to change the intercooler first, so when I remove the OEM one, enought space will free up and I will install Webasto heater. So I'm really...

Any idea about this ?