Search results

Only As far as I can see the only part that's discontinued is the tensioner guide, you can try megazip as they seem to have it in stock. https://www.megazip.net/zapchasti-dlya/honda/guide-comp-a-14430RBDE01?q=14430-RBD-E01 They have 15% sale going on for 10 more hours so be quick.

amayama.com, OEM timing kit is 30% of dealer price.

Right rear and either of the middle ones.

Can be water ingress. Had the same issue, swapped them around to no avail, decided to just leave it and deal with it eventually. Suddenly started working about two weeks later after a dry spell and have been fine since. HDS might be able to read the specific body control module fault but a...

https://www.amayama.com/en/part/honda/74872tl0g00 https://www.amayama.com/en/part/honda/74871tl0g00

Check for electrical and mechanical faults within the system before writing off the compressor. Can be something really cheap like a malfunctioning sensor, a bad relay or worn out clutch. If you can freely spin the compressor clutch by hand then it's likely not completely dead.

Fixed the issue, for future reference the culprit was a worn down compressor clutch. Once heated up the metal expanded and the air gap increased enough to stop the clutch from engaging, the fix is to remove a shim from under the clutch plate to bring the gap back into spec or replace the...

https://www.amayama.com/en/part/honda/35760tl0e12 116.62

You will need the part number from the back of your own switch because they're different between trims/body styles. I know for sure that if you fit a master ES/GT switch to an EX the auto dipping mirror won't work.

Impact socket on the retainer and a tap with a hammer makes them pop right out. There's also a cutout towards the spark plug tube just big enough to get a finger in and hold the cotters in place.

FWIW you can make a valve spring compressor quite easily with some scrap metal, this is what I made to replace valve stem seals on my K20 cylinder head.

Checked once again, once the compressor disengages poking the clutch does not engage it again (spins for about a second and disengages again). Letting the compressor cool down with the engine idling does not do anything. After cycling the ignition and aircon neither fans or clutch come on with...

Yeah that's what I'm asking. Is there any way to check the actual readout of the sensor either via HDS or by checking the resistance on the plug or something. Seems a bit odd to me because if I set the temp to say 18c instead of LO it can work fine for much longer periods of time. Do you know...

Is that something that can be checked with HDS or do I have to chase the wiring with a multimeter?

I'm at the wits' end with this one so bear with me... Aircon been regassed and checked for leaks, all is perfect. Blows 5°C air when it works but after running for about 10-15 minutes compressor clutch disengages and won't engage again until the car has been shut off and sat for 10-15 mins...

Exact same diagrams and part numbers in the EPC so I'd say so.

From a Honda brochure: 1. IMAGE PACK The image pack includes front sports bumper, side skirts and rear skirt. Also shown with optional 18" Sigma alloy wheels. 8. 18" DELTA ALLOY WHEEL Machine surfaced with clear coat and black pearl finish on alternate spokes. 9. 18" SIGMA ALLOY WHEEL...

https://www.focal.com/products/acx-165-s You need the slim version for front doors to avoid issues with window clearance, everywhere else you can fit regular ACX 165. Going to need plastic adapter rings and harness adapters. Swapped mine out for 165S about a year and and I'm very happy with how...

K24Z has a revised chain guide allowing the stretch to be measured from the top - check service manual. If it's the 2.2 diesel no idea, sorry.

31200-RBB-004 seems to be the correct one.