Search results

Hi Pedro, This is an OEM pad. Same pad obviously just at slightly different angle.

Looking good!!!

I think my 1.8 is 65ltr but I haven't went out my way to prove it either way. However this site also states 65ltr http://www.automobile-catalog.com/car/2000/1126220/honda_accord_2_0i_se_5-door.html

Get Torque for Android and a bluetooth OBD2 plug and start the basics there, full app costs about £5 I got this out my 6th Gen

Hi Alex, welcome to TypeAccord. It can affect the fuel strategy, I believe its more likely to run rich if the o2 sensor is out so you might experience lower than expected economy, not that the 6th gen is that great in my opinion. Here is a datalog from my f18b2 engine, you can see when Closed...

Difficult to troubleshoot these things from afar How about HT Leads, spark plugs and distributor/rotor. There has also been notice of solder joints on the Main Relay cracking causing a no-start https://www.youtube.com/watch?v=viIZ8k60awY https://www.youtube.com/watch?v=38DQ5IVQQ68...

Ok Ben, Remember to take care and precautions around the fuel lines, some will spill from the pipe and the filter for sure! Don't pull too hard on the pipes, I might have already said this on the guide so no harm reiterating it lol

Ok Ben, DIY should be here http://typeaccord.co.uk/forum/topic/16993-diy-6th-gen-driver-door-card-removal/

Power Windows, Mirrors Switch ***embly This ***embly has a clip up front and a hook on the rear so gently pry on the front and it should then just lift out. Take care not to scratch the interior. Once clear the each loom plug requires its latch is squeezed before you can free them from the...

Honda Accord 98-02 6th Gen Driver Door Card Removal. Preliminary steps and info. Not many tools required to get this off, however still a bit awkward the first time you try to get one of these off. Tool List 1. Trim Panel Removal Tool – plastic versions might be more forgiving to trim and...

Do you still need this info Ben?

Yeah my 1850cc is in the that VED bracket, for me its now cheaper to insure my car than it is to tax it and won't be long till its cheaper to buy it than tax it :o .

Nice one, let us know your impressions of the install and performance afterwards!

That's what mine was done at (well a little bit before), although sometimes they revise service schedules. I just popped that one up as you can see other service information on it if its of any use.

https://www.youtube.com/watch?v=aMXAZSec18Y or http://honda-tech.com/showthread.php?t=1908944

My door card is off the now, do you have any questions about getting it off?

What happens if you close both side vents? The blown volume of air has to go somewhere so just wondering if you can feel it in the middle vents even a little once the sides are closed or is it totally dead?

Do you have the engine management light on? Can you get an OBD2 scanner to read any codes? I had a misfire situation recently which turned out to be a botched fuel line job so I went down this troubleshooting road; Spark Plugs HT Leads Air Filter Distributor Cap & Rotor Fuel Filter (was new)...

The Honda gasket I used feels like proper rubber when it sets its also very sticky to the surface - I wouldn't say its like a silicone sealant however I am not saying that wouldn't work either. I put a little bead on an old saucer to see how it behaved and it was difficult to remove once it had...

No probs, sorry couldn't be more detailed, but let us know how you get on.