Search results

This can be turned off, if you disconnect ignition switch green plug.

does it necessary to take out a wheel arch to change a belt?

Try it. If it doesn work, just put it back. I think that if you disconnect the dvd rom from the back, everything shoul work even the radio.

I also had a problem, i got broken connecting rod from suspension lower arm to a leveling motor. When i fixed it (i bought plastic rod from BMW dealer, (6euros for it), while honda does not have separate rod, they charge for the whole unit (which is 220euros!!!)), cut it in half and soldered...

Hello guys, can you help me out, where to start to find out, why my aircon does not heating in winter? This time of year is not ideal condition to test this out, but maybe there are some solutions? Aircon in summer is working perfeclty - is i set it to LO it cools completely perfect to catch a...

I think that badge will interfere with radar allowing to radar to fail or be blind through that metal grill. Because by standart the HONDA logo is plastic cover rather than actual metal badge so that radar will see trought. If you put that "sports" grill the bade contais metal particle or metal...

Gosh..., as Goodluckmonkey said, that honda engineered them out (vibration and noise) due to these engine mounts, which a rubber inside (some of them are vacuum controlled) to smooth engine vibration and so on... And thread creator suggesting/asking if anyone tried that device which in some sort...

So whats the purpose of engine mounts? Even though... honda engines do not produce that big torque figures (or any at all :D), so why do you need this?

Do you meen a dual mass flywheel (DMF)?

These hondas have two differents brake sets for front and back wheels. Front wheels have had one set with two piston caliper and one with single piston caliper. Both of them are completely different including brake pads Back wheels have had one set with parking brake in the drum brake, and...

Yes in older applications, without commonrail systems there was no glow plugs as such, the heating occurred in intake chamber where diesel with air was already mixed up. Today we have a commonrail engines (N22B (i-DTEC) and N22A (i-CTDi)) where mixing (sort of) never happens. So there was...

Yes, i think it is enough... For a preheating, i also do not agree, in modern BMWs preheating occurs when you unlock a car and open drivers doors, so you never seeing a glow plug symbol, because it is already preheating. This method is for smoother engine running and of course for better start...

Capacity is not measured by CCA. It is measured by ampere-hours, Ah. CCA is cold cranking amps, the current that battery can provide in about zero Celsius (0 C). Diesel starter motors a heavily depend on this, because the engine is much heavier, and also in the cold, it is much difficult to...

Hello guys, i just began testing my thermostat too, i think it is opening a bit soon, because when engine is at 60C degrees both upper and lower radiator pipes are warm, in addition to this, thermostat should be open at abdout 78degrees. Anyway when i started to look at thermostat prices, i...

It is held only by clips. Firm pull and it should come off. Not a rocket science ;) good luck

Hi guys, i can confirm, that cheapest fuel filter tools is worked for me, perfect with: http://www.ebay.com/itm/151840263656?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Here is mine :) i-DTEC executive with Navigation, LKAS and CMBS

Thank you for this awesome DIY, so the dipstick's bottom is the low mark on the tank, and after 1cm (10mm) to fill up, and there will be a top mark of the tank?

a little bit offtopic, how did you managed to make your back up camera to work all the time? Even if you are not in reverse?

the main problem i can see that cable from center console to the doors are snapped. I have had sound deadening in my all four doors, and i can ***ure the same thing as honda dealer told you. boot release button is separate than power windows control unit. also mirror control unit is also...