Search results

Hi Salim - as I said earlier, thankfully it doesn't seem to be happening now - keep my fingers crossed. I think i'll wait until it re-appears Wookie - not far from you actually. I live in the New Forest. Why do you ask?

Hi F6HAD Sorry for not getting back sooner, I was waiting to see if it happened again and under what circumstances. Weird!!! so far it hasn't done it again. If it does, I will probably get back to you re a visit. Regards

Hi I have started having problems with my VSA light on the dash coming on. It only happens occasionally at which time I stop and turn of the ignition and then when I turn it back on the fault has cleared. It only happens one in a while. Does anyone have any ideas as to what it could be and...

Hi guys Sorry for not getting back earlier. I decided to get the injector re-cond and it was a good decision. Apparently when I took the solenoid off to enable me to screw the hammer tool into the injector I somehow lost the small ball bearing out of it. The company I had it re-cond by...

Hi guys I'll have a go and report back on Monday. Be nice if that was the problem. Save a lot of further hassle. Have a good weekend or what's left of it. Regards

Hi Wookie I'll give it a go. It was registered late 2005. Let you know

Hi one injector because of blowing past seal. What do you mean by vacuum hoses and multiplies. I have checked everything carefully for just that reason

Hi Wookie I took the return nozzle of the top of each injector and when I cranked the engine Diesel came out. I have pumped the primer several times and it did go hard. The engine makes no attempt to start at all. I thought that these Bosch systems were self priming anyway. If the engine...

Hi Wookie Thanks for getting back. No, it isn't I have never had a problem starting before. Only took the injector out and re-installed it. The only electrical connector I took off was for this Injector. Any other ideas?

Thanks guys for your replies. I did fear the worst having read all the horror stories about Injectors not wanting to move but with the use of a cheapo hammer extractor tool it moved very easily and I have cleaned everything up fitted new washer seal etc. Feeling very pleased with myself I sat...

Hi Guys I am just about to remove one of the injectors on my Accord I-CTDI and seem to have hit a brick wall. The 30mm spanner I bought for the job which is a standard open end flat shaft spanner in way fits in to be able to undo the nut holding the solenoid housing. The actual solenoid...

Thanks F6HAD I take it that I do not have to re-code if I re-fit the injector that came out even though it has been blowing. Regards

Point taken TypeR - won't happen again Do you or anyone else know what Injectors are fitted to the Diesel engine 2003>2006. They look like Bosch but without getting them out I can't be sure. Regards

Hi again Thanks for your help so far. Do you guys know what make the injectors are as I need to buy a removal tool for this. And what removal tool did you use. I have seen several kits available but don't want to get the wrong one. As you know from above I have a blowing injector and I went...

Hi Following on from my earlier thread of a few days ago. Had anyone removed/replaced an injector from the diesel engine at all. If so what make injectors are they and what tool did you use. I have seen several different removal tool kits but don't want to by the wrong one. Any help would...

Hi brodziu Thanks for your reply. Lets hope it is easy to remove then. Any thought on my question about re-programming?? Regards

Hi Guys Friday 13th isn't it!!! Drove off in the car this morning and heard a slight ticking noise from engine. When I got back home, took the engine cover off and noticed the noise was in fact coming from the base of one of the injectors. You can actually feel it blowing slightly and a...

Hi Jayok Thanks for replying The left is not far out but could provide better illumination if it was adjusted right a bit. Both headlight l/R adjustments are not working so it seems that you could be right. It feels as if what you say has happened. I took the car into a Honda body shop a...

Hi I know there are a few threads on headlight adjustments but none answer the question. I know how to adjust the up/down and left/right thanks to the UTube article but I can't. That is to say that the left/ right on both headlights can be adjusted but when it comes to the left right...

Hi Does anyone know what Honda say the following should be: Battery Voltage when fully charged without engine running Voltage across battery terminals when engine running Voltage across battery terminals when under load say with headlights and drivers heated seat on. Mine are 12.75v 13.9v...