Search results

How about CRV calipers? I have seen in parts store there are brake discs 315mm and 28mm thick for 4gen CRV and say for 2 piston calipers would that fit 7gen accord?

I noticed abnormal oil consumption 1liter per 2000km and there is lot of fresh oil in boost pipe so i decided to change the Turbo core CHRA but i was wondering what are the values(inhg) for the turbo when setting up the actuator leaver for the VNT? I just checked mine (current old turbo) and the...

So I just filtered the oil with a cloth, which came from the yesterday's engine 5.3liters, and there wasn't much metal at all, no big bits I could see, just small and tiny and not many. that's what cloth caught. Looks like the oil filter did a good job on filtering. I am still waiting for a...

It was definitelly on the side under an angle but not the angle the car would tip over. The car after incident shut off i think it was still in foth gear and because of that. But it was working when it was on the angle and the angle would be the same as you emntioned where chain would touch...

After furthermore looking it loooks like its aluminim in there the magnet doesnt pull it. I looked this morning at the new filter after yesterday installing it and it looks clean no aluminium material. I wan to mentioned 2 weeks ago car was in small accident where another car pulled in and cut...

Hello, just did oil change on my 2.2ictdi accord after 7k milea and wanted to cut open oil filter and found this. Any opinions?

Good luck with the job! I did this a few months ago when it started slipping. 210€ for the clutch and 15€ for the alignment tool, done it in a day.

Check the Upper and Lower torque mount

I would like to give an update on this issue. I have cleaned a MAF sensor and I got HUGE improvement in acceleration. The car feels more alive and fuel consumption dropped huge. I do still get the boost drops but not that huge, that could lead to a slow reaction of Boost Solenoid maybe? Maybe...

Hey, thanks for clearing out this for me you might be on to something. It does it when the engine is cold and will turn on even when it's set to off or Recirculation Off. What I noticed is that sometimes when the outside temp rises the AC will turn off and it won't turn on always only the fan...

Nope, it's stock unit Sat Nav, but i do have a adapter comnected to it so i can connect my Phone over BT

I got small issue with AC, even if its off (set to Manual) the ac compressor and radietor second fan start workig only when i disable Recirculation. Whatever if the temp is set to LOW or HI. When i enable Recirculation the AC stops but my windows start fogging . Is there some AC adaptarion i...

I haven't fixed the issue with boost drop but I did fix IMRC issues with fault code (p2004 stuck open valve), I have installed diaphragm (filters) on both solenoids, and no more fault codes. I still have a boost drop after a certain RPM. I will try to repair my injectors because I have a bad...

When you say diaphragm do you mean this part from the picture down below?

The car has EGR off and the EGR itself has been cleaned and blocked. The intake manifold and IMRC flap have been cleaned(the flap is not sticking) From what I can see only a small admittance filter on the facelift model is remote and on pre-facelift is straight on the solenoid. My second Solenid...

So now I am getting a fault code p2004 stuck open valve. My current valve is denso 101362 4461 which has a green sticker, can I change it to 101362-4800 which has a purple sticker(facelift model)? My Replace it with this

I still haven't fixed the issue, but I have been reading on the internet a lot and there are a lot of ppl with the same problem. uploading the same boost spike and drop and raise, definitely the same boost curve. Could there be a safety feature that will limit boost to save a clutch? I'm not...

Fahad i wish i m close but i am from Balkan few thousand miles away. I have tested it without air filter and nothing changed still boost drop, where would be a intake runner control or where should i check blocked inlet?

I didnt change air filter but to me looks ok i can taks pics of it. Should I try without air filter maybe? What i noticed is lose clip on the bonet cover up next to air intake pipe so i put new clip in and its holding good now i have to test it. The air intake ia standard as far as i can tell...

Hello, When I bought the car I had this strange issue when accelerating with the car, it would accelerate great at the beginning and then it would kind of stop and pick up again. I installed the Torque app and decided to measure boost and RPM i am not sure if any of this is correct with the...