Search results

Yes both sensors contain the temp sensors also, the only other temp sensors are coolant sensors. Hope you notice a difference, personally not sure about using a second hand MAF sensor, but hopefully it works for you. The MAP sensor is an interesting one, it is an after-market one, possibly...

Always worth ruling out the EGR by giving it a clean, Although I suspect it is something to do with the mixture at low revs. Could be the IMRC valve sticking or an issue with a temperature sensor. A common issue is the IMRC Solenoid, which gives these sorts of symptoms, due to an...

Great result Anthony, Glad you found the forum guides helpful

Congrats on the purchase

Alex, Just to clarify on your issue. It does this for the first couple of miles then stops doing it all together ? What happens say when you drive somewhere, long enough for it to stop hesitating, then stop for say anywhere between 1/2 an hour to 2 hours, so the engine isn't fully cold, but...

Thanks for the DIY, As you say not for the faint hearted but a very useful addition.

Think that is pretty good considering ;)

Ian, just a thought, but have you ever had the MAF sensor changed? At the mileage your on, then I suspect it might have seen better days. When I was reading up on them there is a general consensus that they should last around 80K. Many people have of course done much more than that and will...

Great result Dharmesh, Shows it was well worth the trip to HH. Nice meeting you btw, did you ask about the headlight misting? Here's a link to the posts on headlight misting for the forum Headlight Misting Posts. From a quick look it seems the TSB was back in 07, although people seem to have...

As Adam has said hopefully it is the injector quantity coding that is out. As I understand it, the injectors when manufactured are tested and calibrated and a code is placed on them which needs to be put into the engine management system to ensure that the correct quantity of fuel is...

When you had the timing chain done, I recall it was an independent that did the job. Did he replace the injectors or not ? If so did he get them re-coded , I seem to recall you need to use the HDS to do this. is the car Re-mapped at all or standard?

Excellent write up Jason Thanks for taking the time to do it

Reading your thread and re-reading beefy's post below: Can you clarify that you have done the bit highlighted in yellow. It reads to me that you have to keep both keyfobs to hand and as soon as you hear the locking activate press the lock key on both fobs. Otherwise maybe best to take it...

Welcome along Kerr. Have a read of this thread, it might give you a few pointers ABS Light On Also in the top right hand corner there is a custom google search function, which is very good at finding stuff on the forum, here is a link for the search results for "ABS light 6th gen " Google...

From what i've read in the past it isn't a major job, however the main issue is finding a working module, there has been loads of cases where people have either sent them off for repair, or got one from a breakers, only for it not to work. Some have been lucky also, however with fitting the...

Good job Trev. Glad to hear you noticed the differences through each stage, it makes the hard work worth while

Good luck,

Very interesting stuff. Wonder what is going to happen, to warranties, once the missfueling dtc has been triggered

Congrats on the purchase John

Great write up Dan, Thanks for post up +1