Search results

Looking around the forum, this problem affects the 7th and 8th Gen. Including my 8th gen. Are the Master Cylinders the same on the 8th, the reason I ask is that I can not see the 2 holes in the washer as mentioned. I am about to purchase the recommended grease and a plastic syringe and tubing...

Ohh and it comes with a free gift..... Just to clarify, the grease instructions are to use a syringe and squeeze it into the washer with the holes while pushing the pedal down What do you do with the spray, same ?

(I personally think the car is possessed by a Vauxhall) :D

Glad to help out, thanks for the comment Steve

It is when you have your foot pressed down on the clutch and the moment you select the gear is when the wobble is felt (foot still pressing down the clutch). The wobble I can live with, so long as the clutch does not pack in ......

Hi All, I used the Etech Caliper Paint which can be found at most places at a cost of approx. £12. Painted mine with without taking anything apart and the I had no problems at all.

Hi All, Came across this thread by accident, I no longer have my 7th Gen anymore. I can confirm that I used the grommet in question a couple of time (for the Sub Power Feed and also for my ambient lights). I have the full walk through for the under seat ambient lights still and have notice a...

NOOOOOO... Why am I so unlucky with the Honda, I dread to think how much this will cost me.... 68K on the clock, 13 stamps in the book and the car is 8 years old. Been well looked after but the problems I am experiencing with this one is putting me off Honda's a bit at the moment. If the Honda...

Thanks for the info. I have no intention at the moment to lower the car, although I did lower my 7th Gen which looked good. I will fit the 18's first and then decide (The 7th Gen had a huge gaps in the wheel arches and the 8th Gen seem allot better) The Deltas are good although I do prefer...

Hi all, Another possible problem to add to my many for the 8th Gen. This one I have never heard of before and don't even no if it is a start of a problem. When I press the clutch down and select first gear the car wobbles (I would say jerks but it is not a violent movement just gentle). Is...

Hi All, I have standard 17 inch alloys on my 8th Gen and they have some curbing, scratches and I have now noticed rust bubbles appearing. I think it is time to treat myself to some new alloys. The ones i have seen and like are as bellow which are Axe EX15 in 18's : Any thoughts or...

Hi Andy, I have one on my Laptop at home, I will put a link on here tonight when I am back at home (I think it has a few Generations on there) Peter Here ya go..... http://www.haccord.org/eighth_generation_2008_2012_-8.html 7th, 8th & 9th Generations

By the way £90 for a Caliper is very cheap, I have been quoted £562.14 from Vantage Honda Bradford and no option of a recon Caliper. Other Prices : Halfords = £311 MCC (Local Bradford Garage) = £149 MCC it is then !

I mentioned on this post earlier that this happen to my caliper. Once removed and cleaned up with more grease, it worked fine. Now not the case, It is happening again after about 3 weeks or so !!! This is just another problem to add to my many others problems that the Accord has...

Snap, same here.... NS Rear getting super hot and also very smelly. Cleaned the caliper up re-grease etc and all fine so far (after 2 weeks anyway)

I get a noise setting of as well although mine sound like someone blowing down a pipe, quite a deep noise. I would not call it a squeak. If this the same problem ?

I removed my front bumper today to replace a faulty HID ballast. Took me about 20 mins to remove (6 screws in the wheel arch (2 if it is not the GT), about 12 plastics plugs above the grill and about 12 plugs under the bumper) then it just pops off Here is a vid of how easy it is ...

Blumming eck, how much, that's alot for a short ram. Was thinking of getting something but I am way too tight to spend that much :D

I had the full kit which went in the bumper area on my 7th Gen, the resonator box had to be removed (I think that is what it is called). Sounds difficult but it is quite simple to fit. I originally had a short ram which was fine but when I changed to a full induction it I was alot better. I...

I like the fact you don't have to splice speaker wires to install a Sub as the 8th Gen comes as standard with 10 speakers (4 of them I have upgraded) On a separate note, I have requested a price for replacement speakers from HH and they cost £155 a pair just for standard ones !