Dalerobert
Members
Hmmm seem to have a siezed clutch pedal master clutch cylinder was changed about two months ago so hppe its not that, anybody any ideas any help is grately recieved
Clutch pedal seized :((
- Thread starter Dalerobert
- Start date
TonyK7ng87
Members
Hi mate, soz to hear you got issues.
What exactly is happening when you try and use the clutch?
As much info as possible would be helpful mate, im sure ill be able to help.
What exactly is happening when you try and use the clutch?
As much info as possible would be helpful mate, im sure ill be able to help.
Dalerobert
Members
Last night i was struggling putting it into gear clutch pedal was fine at this point so thought it might of been the master cylinder again found that the nut on the adjuster was lose so thought it might of move out of place, so i adjusted it abit put my foot on the clutch pedal and i could feel it getting stiff like when you apply the break and pump them now its solid fella hope that helps
TonyK7ng87
Members
Sounds like someone fitted it incorrectly as there shouldnt have been a loose nut ect.
Sounds to me like you have a load of air in the system.
Do you know how to bleed the clutch from the Slave cylinder?
If not im happy to tell ya how mate.
Sounds to me like you have a load of air in the system.
Do you know how to bleed the clutch from the Slave cylinder?
If not im happy to tell ya how mate.
Dalerobert
Members
Yeah fella i know how to bleed the clutch, i thought your clutch went spongy when it has air in it though or am i wrong?
TonyK7ng87
Members
with an airlock, it can go spongy but on occasions it will get rock hard then over time become soft without touching it.
id also check for blockage in the pipe work mate
id also check for blockage in the pipe work mate
Dalerobert
Members
Cheers fella a job for me over the weekend lol
TonyK7ng87
Members
no probs, if u run into any probs just inbox me and ill get straight to ya