Passenger dipped beam issue

[riot68]

I've been having some headlight issues on my gen7 tourer, for a while now the passenger dipped beam bulb would blow and I'd need to replace it. However this time, even the new bulb (checked it with a multimeter and it's ok) doesn't work.

Strange thing is on the driver's side the red wire clips to the bulb, guessing the outer bulb grounds itself, there is a black wire but it terminated just with a rubber sleeve, on the passenger side though (see the pic) the black wire has a terminal too, I just don't know of that needs to plug in somewhere? Pretty sure I never plugged it in before but maybe it's come off?

Any help appreciated, cheers... James.

 

[mlkehunt]

can't see any attached pictures in your post
did not know you could get executive spec accords with h1 bulbs, learn something new every day
the black wire attaches to a male spade connector nubbin cast into the projector housing to provide a ground for the bulb
circled in embedded picture
they can break, ask me how I know.....

 

[stellamon]

Can't see your picture here either.

circled in embedded picture

 

[mlkehunt]

Can't see your picture here either.

That is strange, works on my pc and works on my cell
Link here, that should work

 

[riot68]

can't see any attached pictures in your post
did not know you could get executive spec accords with h1 bulbs, learn something new every day
the black wire attaches to a male spade connector nubbin cast into the projector housing to provide a ground for the bulb
circled in embedded picture
they can break, ask me how I know.....

Thank you, and yes, it wouldn't let me post a pic, sorry and also yes not H1, H11 and also thank you, I see where it goes now and the light works again, strange how the drivers side is different.