Rear wheel toe wheel alignment arm with bushes

[johnrichard53]

Hi all,
Does anyone know where I might source rear replacement alignment arm with a bush at each end : Honda part number 52360S1AE. I need two as the recent re-tracking showed problems left and right.

I own a much used mark 6, year 2000 hatchback, with a 2 litre engine.

Kind regards johnrichard

 

[mlkehunt]

if you can get away with just changing the bushings and the bolts that is a possiblity. bushings typically use the part number of the arm so 52360S1AE00, inner and outer are identical and autodoc brings up several options
52387SDAA00 is for the bolt, tedgum offers a complete kit and I would get those and avoid febest (also autodoc)

I have an inkling the 7th gen saloon is the same as the 6th saloon and hatch, the subframe is the same for sure, and so are its mounting bolts, 14x90 and 14x125. furthermore the eccentric bolt for 6th and 7th share the same part number
if you can measure the length of the arm from hole to hole I can have a look at the ones on the 7th if you like