From another post:
1) Jump pins 4 and 9. (I removed obd socket by squeezing the bottom of the plug to remove it from its metal bracket, turned the obd connector around and put a paperclip in the 4th pin (black wire) and the 9th at the bottom (brown wire) )
2) Press and hold the brake pedal and switch on the ignition.
3) Wait for the ABS light to turn off and then remove your foot from the brake pedal.
4) Wait for the ABS light to turn on, then press and hold the brake pedal again.
5) ABS light should turn off, then remove your foot from the brake pedal.
6) Wait for two flashes of ABS light. If it flashes it means that errors are erased.
Check the errors (with the pins jumped) - just turn the ignition on, if ABS light does not flash, no errors are in memory.
If your vsa indicator light (triangle with exclamation point is on) and after you drive a distance the icon that reads "VSA" illuminates, try this:
VSA neutral position setting
Do not touch the brake pedal anymore.
1) Jump pin 9 (brown wire) to chassis ground (I have used a bolt on a door hinge, some people say they just left pins 4 & 9 jumped and it worked, I used a paperclip and wire to make it reach the door bolt).
2) Turn the ignition on, after ABS light turns off, quickly press the "VSA off" button.
3) After ABS light turns on again, quickly press the "VSA off" button.
4) Now should be a lot of different blinks and flashes and all lights ABS, VSA and triangle should turn off. The problem's solved.
You may have to try a few attempts, think I got it the third time round