Latest activity
-
CHi I might have asked this before, so I apologise if I have but can't find it anywhere. I am referring to the bits of braided hose/pipe...
-
LLuke_VTEC replied to the thread 2009 Accord 2.2 i-DTEC Steering issue.Just the standard wheels that came with the car
-
CChannel Hopper replied to the thread 2009 Accord 2.2 i-DTEC Steering issue.What wheels are on the car ?
-
CChannel Hopper replied to the thread Valve clearances.I would have to disagree on the second part. All Honda motorcycles I have worked on (two strokes excepted ;) ) require a valve shim...
-
LLuke_VTEC replied to the thread 2009 Accord 2.2 i-DTEC Steering issue.thanks for your reply, I've replaced both lower arms but the issues persists. I'm thinking would a lower ball joint cause the issue im...
-
F6HAD replied to the thread 2009 Accord 2.2 i-DTEC Steering issue.Yes sounds like your control arm compliance bushes are shot. -
LGood afternoon, Wasn't aware of this forum until today, hoping the knowledge of users on here can help me with a steering related issue...
-
F6HAD replied to the thread Valve clearances.Correct, this only applies to K and R series petrol engines (in context of modern Accords) but generally it applies to all Honda petrol...
-
ANZACTinHat replied to the thread Valve clearances.Sorry to reveive an old thread, but, is it correct that a 2009 2.2 i-DTEC doesn't need valve clearances checking? -
F6HAD replied to the thread Changing a clutch master cylinder.Exactly this way.
-
When dealing with the Accord pedal here I found dropping the drivers seat and lowering the back rest, I could do all adjustments upside...
-
TTroy McClure reacted to Channel Hopper's post in the thread Changing a clutch master cylinder with
Like.
When dealing with the Accord pedal here I found dropping the drivers seat and lowering the back rest, I could do all adjustments upside... -
CChannel Hopper replied to the thread Changing a clutch master cylinder.When dealing with the Accord pedal here I found dropping the drivers seat and lowering the back rest, I could do all adjustments upside...
-
TTroy McClure replied to the thread Changing a clutch master cylinder.Good to know, thanks. Not happy about that R clip not being in place so will have to do some dismantling to swap the push rod end...
-
F6HAD replied to the thread Changing a clutch master cylinder.I’ve done the lock nut and push rod adjustment on an 8th gen myself recently, it’s tricky but not that hard. You’ll need a good head...