Recent content by teo_359

Thanks Fahad .I will follow your advice about EGR this weekend if the weather allows it.About bad map thing a few months ago I read or try to read my ECU with MPPS but don't know if is good or complete

jakonya,what happened when you drive it at 2k+ rpm in second and then fifth gear .Is the knock the same? Then is there any difference with hi load and low one like going uphill and then downhill with 2k+rpm?

Iron Man, first I live in Ireland .Diesel here is rubbish, lots of fuel laundering one can never know which petrol station is affected.Then people here in general neglect their cars. Lots of short shopping trips , school runs and no one bothers to use the right oil which for honda is a must...

First about oil. I change my oil every 6K. Between changes I roughly top up another litre .As i said I don't see any visible smoke when idling .Under load I am not sure but definitely not any black stuff.However at first cold start it smells funny for 10 min , don't know if that is unburnt...

Hi Fahad I hoped you would respond to this topic. There isn't any fault from OBD .No smoking when idling . Can't say if there isn't any ' little smoking' under hard acceleration but nothing obvious or like puffing black smoke I have seen on other cars when pushed hard.I have noticed that...

Hi guys My 7th gen Accord CTDI seems running out of steam .It is still going but the pressure of the cylinders is too low especially on 3rd one.Quite a lot of blow-by.I bought it 2 years ago from a dodgy dealer and obviously (now) he filled it with all kind of s**t for a quick sale.So I was...

Fahad '...Ideally it needs a tuner to read off the ecu flash and check if it's stock or not....' =================================================================== To do that do you need to take ECU out or just a reader connected to OBD socket?

Hi I know this an old thread but as Tyler said "...Once the self adjusting mechanism on the pressure plate has adjusted to the lowest setting, is that it? Would it go back to another setting if the pedal was adjusted? ..." or if the clutch was dismantled could it be possible to reverse adjust...