Search results

Thanks all for the advice, I decided on the cheaper option to start with. Both inner and outer tie rods on both sides along with a trip to the local garage for a front wheel alignment. It does feel much better, however I think there is still a slight vibration, either from below me or in front...

Thanks @stellamon I’m going to go with changing out the driveshafts on either side. I’ll check the forums for some ‘how to’ guide. Whilst I’m at it, is there anything else worth changing due to having to remove. Car is now on 87k, I bought it at 46k and it’s not had any suspension/steering...

**update** I have swapped the front to rear but still have the same issue. I have noticed that I can only really feel the vibration under moderate/hard acceleration. Whereas if I gradually build up speed I don’t seem to feel it.

Thanks both, I will get the car booked in for wheel balancing. I noticed yesterday evening that the problem seems to be intermittent. I had a mixed 40min drive where I had the problem around the speeds mentioned above, but then again a mixed over 1hr drive where I had no issues?

Morning all, I have started to develop an issue with my 8th gen Accord. Whilst accelerating mainly around the 40-60mph area I get a fair amount of steering wheel vibration/judder. But only on acceleration, once I ease off the accelerator the vibration stops. I also don’t seem to have the issue...

I went for the Philips Luxeon series not the Cree ones, I can’t link them all exactly because I can’t remember all the figments for each, ie H1 etc…. I noticed they have released a newer version Philips Luxeon ZES version. They do work out very expensive but so far had no issues and they look...

Front bumper that should say haha

Hi, it was easier to remove the front number to gain access as I was replacing all the halogens to led including fogs. The covers fitted back on fine.

Hi guys, just needing a bit of advice. I’m going to replace my RH rear brake caliper and was looking on Euro Car Parts and they list to versions one with the hand brake bracket and one without, the one with isn’t in stock and is also almost twice the price. What I want to know is can I remove...

Yes, I used horizonleds.co.uk for mine. I’ve had them in now for just over 2 years with no issues. They are expensive though compared to Ebay/Amazon alternatives.

Hi guys, hoping someone on here can help me out, without me having to take wheels off to check sizes. I have a 2013 Accord 2.2I-DTEC Auto, could someone confirm the disc sizes front/rear or the OEM part numbers for pads/discs as there seems to be 2 different options. Thanks

Hi has anyone used these pads before? I have managed to find them for £123.31 for a full set of disks and pads! Anyone had any experience of the brand? https://www.partsinmotion.co.uk/car-parts/braking/brake-discs/borg--beck-brake-discs-pair-bbd4744-detail...

Full wiring diagram

Hope this helps, couldn't fit all on one screen.

Update on the delivery....item has finally arrived in the UK and is now at my local depot for delivery on Tuesday. Customs charge was £12.24, so making the item £68.49 all in. Let’s hope it’s actually what was ordered! Will keep you posted.

Yes the connector you are talking about with the white clip is removed by inserting a small flat head screwdriver into the white lever, you should see a small clip on there that you push down on and then the white locking lever should turn and release allowing the connector to be unplugged.

Although it doesn’t list 8th gen Accord I messaged the seller who confirmed it did. The modular connectors fit in the factory harness but the instructions are so poor I’m not sure which colour wires are lock/unlock on the actuator and power on the MICU. So haven’t been able to successfully...

￡15.79 | LY-LEAMORE car auto folding side mirror for CRV 2008-2014 / Accord 9 TH / FIT 2009-2015 DC 12 V https://a.aliexpress.com/_mM2j89R

@smokingman totally agree the premium sound kit was far superior to my standard setup. I ended up having to buy a Bose amp, Sub and new speaker setup to work with the Kenwood double din. Sounds epic now

Great read, I am struggling to find the plug and play kit mentioned above. And didn't get a reply back from japanparts as of yet. So I proceeded with an AliExpress kit apparently suitable for the 8th gen Accord. Its part plug and play, however there are 3 wires that need tapping into the...