Search results

According to 1010tire wheel offset calculator after putting my current specs in as stated on other posts, and your sizes including the 25mm spacers which would make your offset 30mm it would seem that your front would be 6mm shy of flush and rear 10mm shy. But bear in mind this measurement on...

No they are not E marked unless your light units are from a Type s which come with factory Hid's. I was like you but went ahead and purchased an hid kit from Horizon led which I have still to fit when I get time. The light units use projector style lenses which give the light output a clean cut...

Had 20mm H&R hubcentric on my 2.4 tourer all round with 19x7.5 et55 wheels and no problem whatsoever if that's any help to you, can't remember the clerance I had left but don't think an extra 5mm would matter. Would all depend your wheel specs and tyre size and if you are lowered etc.

Usually buy all my H&R spring kits through Larkspeed , seem to be the cheapest inc P&P or used to be anyway. I will get some more pictures for you over the weekend and add them to my photobucket in the link above. One thing I forgot to mention last time is make sure you get the correct axle...

Hi Asher, I have had Eibach springs before on an Accord type R and since then had H&R on my Civic sport and CL7, I have also installed H&R on a Civic type R and polo R line and to be quite honest ride comfort are very similar to one and other, lowering however I would tend to favour H&R as on...

No problem,The wheel specs are 20x9.5 et 45 with 245x30x20 tyres on rear, could have gotten away with possibly 255 so as not as stretched but am running natural camber on H&R lowering springs so if you intend fitting rear camber arms I would stick 245 as at present I have 6mm clerance between...

Here is the link for the pictures, failing that I will try and upload them for you. http://s842.photobucket.com/user/lurajcroll/library/?sort=3&page=1

Hi guys, gave some advice about fitting 20" wheels with pics on the other wheel calliper clerance topic if it's any help to you all. They were 9.5 rear and 8.5 front with no arch mods, yes I have stretched rear tyres on the rear but do not rub even lowered and as recommended by my body shop arch...

Hello folks, just an update on my mission to fit my 20" wheels and am pleased to say that I have finally got there :) , I had to space them out on 10mm spacers up front because of that stupid brake carrier Honda made but to be quite honest I actually prefer it this way as they are bang on flush...

Forgot to mention Impne, just buy h&r hubcentric 20mm spacers either side for your car, they are the bolt onto hub type with built in new studs, your existing studs will protrude through by 5mm but your rage wheels should have recesses between bolt holes that will accommodate this. You can fit...

Right guys, I took the plunge and bought the wheels, they are 20x8.5 front and 20x9.5 back both 45mm offset however I am going to have to fit 10mm h&r spacer to fronts to clear that blasted carrier. The annoying thing about this is that I have done loads of homework on acurazine and tsx forums...

Right guys, needing some advice, the front brake calliper carrier on my 2.4 sticks out considerably as apposed to previous Hondas and is giving me problems trying to fit the alloys I am looking at getting, Obviously you can't remove this hoop type bar as that would be just stupid but would solve...

My car colour is volcano grey richsprint Yes mr Honda they are lightening alloys but as they came as standard on the limited edition M200 civic I just refer to that when people ask. As for the 35mm sidewalls, yes they are very firm and a bit harsh but I guess im used to it now as I have been...

I run spacers on my last cl7 with these wheels on it, I too was a bit concerned at first but it worked out ok as I opted for H&R hubs centric spacers. These bolt onto the hub with the supplied bolts and have built in new studs, providing your alloys have recesses between the bolt holes on your...

Ok heres pictures I hope,[/URL][/img],

Forgot to say my tyre size is 215 x 35 but 225 would still clear and my wheel has about 5mm tuck up front and has 6mm clerance on rear arch and I am lowered on H&R springs. I will try and enclose photo to give you an idea of how this wheel specs look, I will have to do my homework first on how...

Depends the width of rim your thinking about. On our cars max at the rear is 19" x 8" with 32mm offset, front however would stick out past wing and rub so better with 45mm offset. I run 19" M200 honda alloys on mine, specs are 19" x7.5 55 offset and I have 20mm H&R spacers front and rear.To...

I thought you guys would say honda B) , was kind of hopeing you were going to say good things about the GRP ones. Can understand what you are saying as had this problem with ripelling on my last civic type s mugen rep spoiler and like you lot was never happy with the finish. Looks like i will...

Right fellow members, im after some honest opinions here on sport side skirts for my car. Dont know whether to go genuine or GRP copies,have already fitted a GRP type S replica front skirt which once blended and fitted is good as original.My big problem with the skirts is how to fit them, yes...