diy

  1. H

    Torque setting

    Good evening everyone, I just changed my the front top mount on my mk7 2.4 and I can't find the torque setting for the bolt that goes on the top. I found all the other settings for the suspension on here for which I'm very thankful but I can find the top mount anywhere. If you have it don't...
  2. Trawa

    [Guide] K24Z3 VTC actuator spring replacement

    If your car suffers from the infamous cold start rattle, that means your VTC actuator has gone bad. The bad news, you have to fix it before it causes further damage to the rest of your engine. The good news, the fix is £20 and takes about an hour of time plus some basic tools. Things needed...
  3. Richard B

    2 bolt manifold heat shield

    Hi folks Anyone know where to source a 2 bolt exhaust manifold heat shield? I can't find any online but perhaps I am not using the correct search terms. I've had to make a modification to temporarily fit a 3 bolt heat shield to fit a 2 bolt aftermarket replacement manifold. Where do the 2...
  4. apintofmild

    Review: Ambarella A7LA50 Dash Cam & Install

    Although my driving is small potatoes compared to your average sales rep or taxi, I do about double the UK annual average. By my reckoning that makes me twice as likely to be involved in (or witness) a motoring incident (or not, for various reasons, but you get my drift). Given my liking of all...
  5. SirHansen

    DIY - Replace front swaybar bushings accord 2007

    Hi Just a quick DIY on how I changed my front swaybar bushings Bought new original one at my local Honda dealer. To access the rear bolt on the clamp that is holding the bushing, you have to lower the subframe some bit to get access. Apologize for my English, I am from the same country as...
  6. M

    Diy DPF removal

    Hi I have a 2008 Accord Diesel which is currently in limp mode. My dpf light came on recently so i put dpf flush, redex and thrashed the car down the motorway for 4 hours but it is still in limp mode. I am resigned to getting rid of the dpf but want to find someone near to Nottingham Derby or...
  7. SirHansen

    DIY - Replace bad/cracked manifold on 2.2 i-ctdi Accord 2007

    Hi In this DIY, I will explain how I did the removal and installation of the new exhaust manifold. I apologize in advance if there are any error in my writing, I am from Norway, and this is my first post so please bare with me :D Honda has an 7 year/200000 km service on this error, but mine...
  8. KyleF18Martin

    Replacing Radio for Aftermarket Unit

    I currently own a 2002 1.8 sport with the factory honda radio unit, i recently bought a becker unit from my freind who no longer wanted it, its apparantly a german brand which are fitted to mercs, audis etc. I know it will fit with one of those cages that make the radio circumference larger, but...
Top