Buying alloys advice

[cobanstine]

Hello people

Just would like some advice on buying alloys for the accord. Still trying to get my head around the offset and I had something like these in mind.

 

[F6HAD]

Hi Satnam, those would go straight on but are the wrong tyre size.

Correct sizes are:

225/45/17
225/40/18
225/35/19

Offset should be between et40-55 and a maximum rim width of 8 inches

Centre bore has to be equal to or more than 64.1mm and you will then need rings to bring it down to 64.1mm if larger.

Stud pattern (pcd) is 5x114.3

Hope that helps

 

[cobanstine]

Thanks Fahad appreciate it!

 

[Tomce]

Hi Satnam, those would go straight on but are the wrong tyre size.
Correct sizes are:
225/45/17
225/40/18
225/35/19
Offset should be between et40-55 and a maximum rim width of 8 inches
Centre bore has to be equal to or more than 64.1mm and you will then need rings to bring it down to 64.1mm if larger.
Stud pattern (pcd) is 5x114.3
Hope that helps

Nice explain, Faddy,Is it offset for 18 inch wheels the same?

 

[F6HAD]

Yes mate as rolling radius should always remain the same if you maintain correct tyre size then stuff like offsets etc should remain the same on all sizes

 

[cobanstine]

Would I need the hub centric rings for these alloys (ep3) (225/45/17 tyres) got them refrub and put on, the steering feels like it's got a mind of it's own (pulling to left and right). I'm looking to get alignment done soon to see if that helps