What's new

Help needed...2.4 accord 56 reg.

becks999

Members
Messages
27
Reaction score
0
Location
manchester
Car
honda accord saloon
Hi guys,

Quick question, I had a problem with drivers side front end lower, same spring shot so replaced all four with eibach pro kit.. Great results :)

One week later after settling still seem to have lower corner front drivers side...??

Any ideas would be welcome.......

Thanks in advance
 
Have you checked you're shocks as this one might be shot.If so Becks I would advice getting both sides replaced at the same time.
 
Do shocks carry any load in that regard? What about ball joints or other suspension components? Although, I'd like think the mechanic who fitted the springs might have picked up anything untoward?
 
Broken drop link? Mine was down on one side when a drop link ball joint came apart.

But I guess this should have been noticed!
 
The mechanic said everything looked clean and neat, one of the finest examples... My question him further
 
FWIW - my Accord sits lower on the driver side than passenger side. It's not perfectly level all the way around, the drop on the driver side is 1" lower than the rest of the car! Now, I've checked for damage, spring compression rates, sub-frame warping, UCA / LCA you name it. They are all within specification!!! Never could get to the bottom of it. But the car is perfectly level, doesn't pull and passed the NCT (equivalent of the MOT) no problem.
 
Top