riot68
Members
Doesn't seem to happen when I go over bigger bumps, just a general knocking when on a little rough road, maybe drop link?...
The back of my car's rattling something rotten. Been told there's play in the roll bar linkages and that my bushing's could also do with replacing. I'm getting it done as soon as January's pay comes through.
If you can manage the MR2 then the accord is easy, still cringe everytime I have to get under mine.
Mine was rear ARB when I had a similar sound, no harm in replacing for a tenner, very easy access too.
Cool, will check it out, best place to get the bushes, Honda dealer? anywhere easy online? cheers...
I got mine from a dealer, for the low cost, there's little to be saved by going online.
If you go here, you'll find the parts
http://www.hondaoriginalparts.com/honda_car_parts_block_selection_C30.php?mod_01=533
Oh my, that looks a bit complicated, am going to have a shifty underneath next week, long drive today and didn't really notice. Does anyone have the part number to hand?, cheers again...
... Fingers crossed I can get the old ones undone...
! Didn't have a nut to fit the new bolts so tried drilling out and after snapping the drill bits have just taken it round the corner to a garage. Am gutted I didn't get to do the whole job myself. I'm hoping they just charge me a few quid as there's not much left to be done. Anyway will know to give more time next time as need the car in a few hours, cheers...
Was the passenger side nearer the back, wish I had had a drink and re-read your post. The garage charged me and out at £35 plus VAT £42 as they said they took ages to drill out as my drill bit that snapped was stuck in there! Didn't have a nut that fitted anyway. Had a right go at the garage owner who said sorry and they'd look after me next time, like there will be one! Really ****ed me off, don't go there very often but just round the corner and thought they'd help me out. Still live and learn, had a good check under the car while I was laid on the cold wet drive too haha and the problem seems to be fixed too. thanks again for all the help...