Land Rover Alloys

[KieranD]

Hi guys,

I was hoping to use the wealth of expertise on here for some help.

I've always loved land rover alloys on cars although this modification is usually only for v dub owners (yuk)

I have a real soft spot for the 'P38 Mondial' Wheels mainly found on the Discovery II

What is the best way to adapt these to my car? Would it involve getting some 5x120 to 5x114.3 adapters or would I still need to worry about the 'bore' size and offset etc? I'm pretty rubbish when it comes to offset set and all that as after the pcd fitment is sorted I lose all knowledge from there on.

Your help would be greatly appreciated ^_^

Thanks in advance

Kieran

 

[Fandango]

If you use wheels from an early 1 series Freeloader, they are actually the same pcd as Jap stuff.

By coincidence I have a set in my shed I sold about a month ago, but the buyer has made no effort to collect them.

So they could be for sale in a month or so.

 

[F6HAD]

You will need adapters for the pcd conversion and then spigot rings for the hub (***uming the Land Rover has a larger hub than the honda 64.1mm)

Then you will need to consider the rim width and offset too, and also bear in mind a pcd adaptor will add some offset