Hi Andy, thank you for detailed reply, i will defiantly use this info if this will be what you mean. Before i post about the cable changing i was also thinking about the caliper to be stuck, because i had that problem in my previous auto.Then i just tided the spring to bring more power when it has to pull back.. At this situation is strange it gets stuck if i pull a little bit more then 2-3 clicks, then i have to go in back and pull it back with pliers. But the problem is that when i am moving it with pliers up and down(the lever) it goes back by its self without any resistance, only when i pull it with handbrake from inside then it does not get back in position. So i was thinking about the cable might be damaged at some place and cousing the stuck. How can i check it to make sure where is the fault? Remove the cable from the lever and try to pull it with pliers - release and see if it really goes all the way back? i will go remove the tire to see whats happening now