Menu
What's new
By:
Advanced search...

What to do next

D

dejv

Members
Messages
181
Reaction score
6
Location
att
Car
Accord 2006 I-CDTI
Which mod do you suggest to do next

Car has been

Lowered
Tinted rear side windows and rear window
Wheels
Bumper kit and rear spoiler
remapped and egr off
wind deflectors
polished and waxed
dual silencer


I was planning to do a fmic but according to fahad engine need pushing harder just to make same power due to pressure drops.

any suggestions?
 
Get the full LEDs and Hid conversions if you have headlight washers already installed. Just like my car :)
 
I only use car twice a week and only during daytime so might be little useless but was planning to do the sidelamps and rear plate lights.
 
Lowered. From my mods, it's the best bang for buck. Cost just under £300 for springs and labour and the drive is so massively improved.
 
what is the standard size of the discs on the i-cdti ? Do I need to replace just the calipers or also the discs ?

and from which car can I take them ?
 
firstly, put up a link to pics!!!

There's a few options for brakes, you can use ATR twin pots and ATR pads, or you could go for 8th gen Type S calipers with discs and pads. some people have noticed better braking from just going with braided lines... It's up to you
 
Easiest swap is to source a pair of 6th gen Accors type R calipers. Make sure you get the carrier too.

All you need then is the new pads. It wears the same 300mm discs
 
Ya with a remap I would do the brakes, I have mtec drilled and grooved discs and ebc yellow stuff pads and braided lines all round and makes huge difference, and the drilled and grooved discs makes a nice noise when braking but unfortunately u will have to wash the alloys a lot more because of the brake dust
 
my next mods will be:

fitted leds all round maybe hids (easy job)
front strut bar
better brakes (do you know if the 8th generation civic type r brakes fit ? )
 
You must log in or register to reply here.
Top