Latest activity
-
MHi. Is there a oil temperature sensor on R20A3 engine and if there is can anybody tell me its location. The problem is o a diagnostic...
-
mlkehunt replied to the thread Head Gasket Selection.I have not had to do this particular job, but this kind of tightening torque is not unheard of, but you may need a longer breaker bar... -
Cchesjak replied to the thread Head Gasket Selection.Mikehunt I at last got round to doing the car and yesterday started to tighten the head bolts. Torqued up as required and then started...
-
SStefaTGM replied to the thread Clutch help 2.2 i-CTDi.Good luck with the job! I did this a few months ago when it started slipping. 210€ for the clutch and 15€ for the alignment tool, done...
-
CChannel Hopper replied to the thread Clutch help 2.2 i-CTDi.Jetwashed inside and out and everything looks accessible but has shown up the continued demise of two of the engine mount rubbers. One...
-
F6HAD replied to the thread Aircon clutch engaging intermittently.You can use a feeler gauge to check for gap normally -
Fixed the issue, for future reference the culprit was a worn down compressor clutch. Once heated up the metal expanded and the air...
-
Trawa replied to the thread Aircon clutch engaging intermittently.Fixed the issue, for future reference the culprit was a worn down compressor clutch. Once heated up the metal expanded and the air... -
mlkehunt replied to the thread Android heat unit advice.I'm just a curious amateur like the rest of us lol petrol dimensions are sligthly different but the couplings are in the right places...
-
RRob23 replied to the thread Android heat unit advice.Cool thank you both of you, well when I get the android unit ordered and delivered i will update it into here, and see how it goes ill...
-
apparently, the operating conditions for the valve are quite specific, below 5c ambient and water temp below 75c, and it only does this... -
Richard B replied to the thread Android heat unit advice.Thanks Mike, that makes sense. I didn't know about the conditions in which the bypass operates, and that is good information. Scanning...
-
Bbobfish45 replied to the thread TOURER AIR CON..Update, I can't take off the faulty Autodoc a/c compressor until I have a replacement, so I removed the clutch from my old compressor...
-
You are an absolute star. I think from watching everything so far (the dismantle and cleaning of the bell housing internals) I might...
-
mlkehunt replied to the thread Clutch help 2.2 i-CTDi.unless you have a really stubborn circlip or crusty splines, yeah they just pop out. swift and decisive prying/hammering works better...
