Latest activity
-
Ddavor replied to the thread Hissing sound.Update : After 20000km this fix is holding well!! No problems so far
-
CChannel Hopper replied to the thread Wheel speed sensor or abs magnetic ring?.I found the original sensors with the car had fallen apart through age, there is athread about drilling out the debris and cleaning the...
-
mlkehunt replied to the thread Wheel speed sensor or abs magnetic ring?.inspect wiring near the brackets, 7th gen is probably worse for this where it mounts on the upper wishbone but it may be worth a shot if... -
CJust had abs vsa and cmbs lights come up on dash. I stopped and switched off then back on then it's fine. Plugged computer in and I'm...
-
CChannel Hopper replied to the thread Clutch help 2.2 i-CTDi.Thank you for the advice. I will check the tool in the box again, have a good look through the video this weekend (it looks to be rain...
-
F6HAD replied to the thread a/c pressure switch..Normally behind the bumper on the driver side. Remove the bumper and follow the aircon pipework -
BCan anyone direct me as to the location of the a/c pressure switches on my 2.2 tourer? Many thanks, Rod.
-
Chttps://www.sealey.co.uk/product/5637204655/self-adjusting-clutch-tool I have one of these, fits 100% but check with mechanics locally...
-
Bbobfish45 replied to the thread AC compressor.I should think that there's nothing wrong with the product and they have reimbursed me, so, apart from the inconvenience of fitting...
-
mlkehunt replied to the thread Clutch help 2.2 i-CTDi.https://www.sealey.co.uk/product/5637204655/self-adjusting-clutch-tool I have one of these, fits 100% but check with mechanics locally...
-
mlkehunt replied to the thread Head Gasket Selection.straight from the electronic service manual, I guess it gets a little confusing because they've split the tightening instructions into...
-
CChannel Hopper replied to the thread Clutch help 2.2 i-CTDi.Ah, alignment tool. The kit comes with a plastic threaded version, (and the paperwork mentions a pressure dial) Should I be looking at...
-
CGood luck with the job! I did this a few months ago when it started slipping. 210€ for the clutch and 15€ for the alignment tool, done...
-
Vvenoox replied to the thread AC compressor.I also bought the Airstal one from Autodoc and it's working fine (for now :D)
-
Cchesjak replied to the thread Head Gasket Selection.""I believe in you!"" Thanks - not many people do!! Seriously- where did you get that info. withstand 310degrees?? I prey you are...
