brake

Has anyone had any problems repairing or replacing their brake master cylinder? I have a 2003 2.4 Tourer which has a 13/16" BOSCH brake master cylinder honda part no 46101-SDD-E01. I have started getting air in the front right & rear left brake lines with the occasional brake pedal having to be...

So I've found out that if I pump my brakes while standing still for about 20 seconds, the check engine light will always come on. The code is P2004 and is something about an intake manifold runner flap being stuck open. Seems really odd to me. Nothing about the behaviour of the engine changes...

ATE 296mm single piston brake. Has anyone removed the rubber bushes through which the guide pins slide? If so, whats's the best way to get them out without damaging them. I don't want to spend £45 on new ones unnecessarily. There's a long, slightly tapered bit sticking out of the back of the...

Hi all, I know that there are many topics about brakes updates, but I want to try to gather all information I found in a unique topic. I focuses only on Honda or Acura OEM updates, because they are cheap, easy to find and maintain. Front brakes updates OEM Accord Calipers1 floating...

Had the car serviced yesterday (55 plate 2.4 saloon), and all is well except the brake light on the right side of the boot lid isn't working at all. My mechanic said there's no current at the bulb and he's having it back after Chrimbo to sort, the brake light on the body works fine so it's not...

Hi all, I've replaced the discs on the rear axle on my Accord Tourer. Once everything was of I found that the brake disc shields on both sides had rusted away, the entire shield was just barely staying in place by a few inches of metal left. I didn't have new shields at hand so I cleaned and...

Hi, can you tell me how much is the bolt space between each other, on the front calipers? I mean that bolts on which the calipers are tighten on the supports.