Latest activity
-
Júlio Rocha replied to the thread 2.2 DTEC EGR VALVE.sizes by Gemini (IA). Can anyone confirm? Thanks. -
-
-
ANZACTinHat reacted to dmaguire's post in the thread Clutch Bite Point and Wastegate Stick with
Like.
update for anyone else experiencing a similar issue to the clutch issue, on recommendation of Taylor I bled the clutch and the brake... -
ANZACTinHat reacted to dmaguire's post in the thread Clutch Bite Point and Wastegate Stick with Like.
Hi ANZAC yea sounds like a very similar issue to what I was experiencing, i would definely try blleding the clutch, either find it...
-
ANZACTinHat reacted to btjtaylor's post in the thread Clutch Bite Point and Wastegate Stick with Like.
Yes there's a separate reservoir and system, have a quick look on YouTube it's similar for most hondas
-
ANZACTinHat replied to the thread 8th Gen DIY: i-DTEC Manual Gearbox Oil Change.Thanks.
-
ANZACTinHat reacted to F6HAD's post in the thread 8th Gen DIY: i-DTEC Manual Gearbox Oil Change with Like.
Don’t put any flushes through it, just stick to a normal fluid change with genuine MTF3.
-
Júlio Rocha replied to the thread 2.2 DTEC EGR VALVE.Hello, Thanks. Maybe I could manage, but I would need the exact measurements so that I don’t have to start dismantling beforehand...
-
-
BBounder replied to the thread 2.2 DTEC EGR VALVE.Do you have any machinists or engineers near you? You could simply loosen the pipe and trace the shape with a pen, then get it cut by a...
-
CChannel Hopper replied to the thread P2008 & P2004 on facelift 2.2 i-CTDi engine..It could be a dodgy earthing point (or two). Has the car had the engine out at any time in its life, or a previous life near the sea ?
-
Júlio Rocha replied to the thread 2.2 DTEC EGR VALVE.Good evening, unfortunately this seller does not ship to Portugal (https://www.ebay.co.uk/itm/121257881612). Can anyone recommend...
-
Richard B replied to the thread P2008 & P2004 on facelift 2.2 i-CTDi engine..If the solenoid is an on-off and nothing in between thing, perhaps putting in a relay with a proper (fused) 12V feed would help. -
SActually from the first part you stated, it looks like you plan to do a full conversion to the lesser model, having the screen lower. If...
-
F6HAD replied to the thread P2008 & P2004 on facelift 2.2 i-CTDi engine..It needs to go on a diagnostic system for a proper functional test. -
EHello lads, I'm writing on behalf of a colleague of mine. For a while, he's been complaining that the engine feels very sluggish at...
-
