Search results

I've had a quick look on google and it appears to remove the chrome pillars is a bit of a headache. I can either vinyl wrap them or plasti dip them, but I cannot decide. Has anybody on here done this? If so any help would be appreciated on how to tackle this.

Hello all. I was just wondering what would wide wheels with low offsets look like on the A spec suspension? Stupid? Too much poke? Wierd? Can't find any pics to get an idea. I've had coil overs previously where wheels obviously fit a lot better but what about the A spec? Cheers

Question for you folks. On my 2.0 Accord petrol I've currently got a custom single exit de-cat back sports exhaust setup with a silencer in the middle. It will be removed as I am going back to near standard as possible with the sound and music it currently makes to hardly any noise at all. I...

Tools needed Flat head slim screw driver Star screw driver to remove two screws from fascia Wire cutters maybe required depending on length of bulb wires Feel for two screws at the bottom of the large fascia which has the coin pocket. One left side, one right. Once they're out you can gently...

Question for you folks. Would a CL9 2.4 2004 executive A-spec suspension fit my CL7 2.0ltr 2003 saloon? I've also got a skunk2 front camber kit and a J power rear camber kit if that matters. Thanks

So i decided to buy myself some daily wheels as I didn't want to ruin my Rota's. So... Here are the Mazda RX8 wheels in bad condition. Bubbling paint, flaking, major kerbing and pitting... First time I'm refurbing as well! Materials used from Halfords and some at home:- x1 240 wet...

Was driving to work this morning and i can hear a screeching / scraping noise coming from the rear driver wheel. Had a look with the torch but I can't see what is causing it? Was ok yesterday. I'm guessing maybe some grit or something is the cause. Any other idea's what it could be? My wheels...

Hello folks, Wierd one really. I was driving to work this morning and my ABS light just appeared on the dash? This has never happened before. I parked up at work turned the ignition off and on again and it has disappeared. I did check the ABS fuses and they are fine. What could be the reason...

My review.... I read up on this and thought i would trial it out. I am very pleased to if i'm honest, but am with majority of Meguiar products. I wasn't to keen on the nozzle design though as it shoots out more liquid in one direction rather than a spray mist if you know what i mean. Very easy...

Guys, I've noticed recently that when i turn corner slowly or fast there is a grinding metal like noise coming from the rear of my car. What could this be? I am running 18 X 9.5 et 38 in the rears with a -3.50 camber. The rear arches are flaired and the lips rolled back so there is no chance...

I don't know if anybody has attempted this yet but here is my guide. Tools required gloves star head screw driver flat head screw driver wrench with extender 10mm socket nose pliers Red circles are areas you need to work in. One thing that most of you may suffer from is the plastic clips...

**** pit headlight levelling adjustment switch I adjusted my light level switch this morning and only the driver side one is going up or down. The passenger side doesn't move? :( It didn't use to do this. What could it be? Cheers Faz

Chaps, I have noticed recently that my passenger side headlight has alot of condensation building up and is getting worse. I installed my HID's in 2008 and have not had a problem since. I am a little concerned as to why this is happening now? A recall was done in 08 to attach metal clips to...