Search results

item 5, i can see fluid on the bottom of it and it keeps dripping when the engine is running, im guessing its time for a new rack? looks like a PITA to change :(

i had to remove the seats on the wifes accord, refitted them and now the SRS light wont go off, the connectors are good and tight and make a nice click sound when connected, how do i go about resetting the light?

of where the main PAS feed hose (top one on the pump) goes, i removed mine without taking any pics and struggling to route it round the back of the engine :ph34r:

can you just use halfords stuff or do you need to use proper honda spec.fluid? thanks

is it straight forward to remove the F20B6 engine? car is an auto if that makes and odd?

to start off with i have checked any of the sensors or anything, but, the ABS light comes on on the wifes car, if i turn the ignition off and plug the odb on then turn the ignition on the light goes off,remove the obd and it comes on,what could possibly make this happen? many thanks john

how in the name of ******y does it come out? ive removed the little u clamp thingy and wrongly ***umed it would just pull out - so how do u remove it?

need 1 for the 2.0se, are they the same regardless of engine size?

we got out accord in 08 and since we've had the accord none of the weatherstrips have ever cleared the windows (either inside or outside), they are all in good condition but they just dont clear the windows, the wife is on about replacing them all but i see no point in doing so as the...

as per ***le, is there any difference in the calipers between the different engine sizes or are they all the same?

how do you remove the fuel pipe on a gen 6 accord? failed the mot for a fuel leak so looking for a replacement but how are these removed? thanks

hi all, got a sport spoiler and need a pic to see where exactly it should be seated, preferably a side on close up if someone would be so kind.

managed to get a boot spoiler, (believe its from a Sport), one of the bolts that holds it to the boot has snapped, leaving it with only 3, what is the best way to fit another, guessing there must be a way? ps it has a brake light fitted, but i can only see 2 wires, is that correct?

the strip that runs up the side of the windscreen is loose, when driving along you can hear it and its pretty annoying (not to mention it wont be weather tight), can i use sealant to seal it andhold it in place? or is there a reason i shouldn't?

are these any good for normal usage? they seem to be quite cheap.

has anybody managed to get a lambda to work ok with this engine yet that isn't from honda?

put a new cat on the wifes car, next day the MIL comes on, codes: codes: P1166 Primary HO2S (No. 1) Heater System Electrical P1167 Primary HO2S (No. 1) Heater System P0138 02 Sensor Circuit High Voltage (Bank I Sensor 2) i checked the front sensor with the laptop got a reading of 0.8v, i...

is around 10% ok?

have changed the plugs and air filter ive used easy obdii to view the lambda reading and got 0.8v steady, under load lifts to 0.9v, on lifting off drops to 0.3v before lifting again to 0.8v so im ***uming the lambdas ok? if i disconnect the battery would that reset the ecu and possibly help?

so, put the wifes cold weather tyres on her car earlier, after i put them on i gave the wheel a spin and it was really stiff, it also sounded like it was in gear but i double checked and it was in "N" (autobox obviously). i removed the wheels and both front caliper, removed the brake fluid...